692530
41
Zoom out
Zoom in
Previous page
1/58
Next page
GB 14
Settings
Switching on and power setting
e cooking zones have 9 levels. In addition, there is a ‘boost’ setting,
which can be recognized by a ‘P’ on the display (see page 15; ‘Boost’).
Place a pan on a cooking zone.1.
2. Press the on-/off button
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
of the hob.
A single beep will be heard and on the display of each cooking zone
‘0.’ will appear. e red light to the top right of the on-/off button
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
is
constantly on. If you do not undertake any further action, the cooking
zone will automatically switch off after 10 seconds.
3. With the
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
or
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button, set the desired cooking zone in the
desired setting. e hob automatically starts in the set setting
(if a pan is detected).
If you press the º
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button for the first time, setting ‘4’ will appear.
If you press the º
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button for the first time, setting ‘9’ will appear.
Tip
You can press and hold the
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
or
F00002557 - LED Screen ATAG TC (700002940000)
24-08-09 IH
button to set the desired power
more quickly.
Pan detection
If the hob doesnt detect a(n) (iron-containing) pan after a cooking
power has been set, on the display both the pan detection symbol
and the set power will both keep on flashing and the cooking zone
will remain cold. When no (iron-containing) pan is placed within one
minute, the cooking zone will switch off automatically (also refer to
pages 12 and 13; “Pans”).
Residual heat indicator
If a cooking zone has been used intensively it will retain heat for
several minutes afterwards. As long as the cooking zone is still hot an
“H” will be visible in the display.
OPERATION
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KI6111P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KI6111P in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info