Manual ATAG KF8178ADR (page 23 of 60) (English, German, Dutch, French)

556954

Zoom out

Zoom in

1/60

Problem Possible cause Solution

The compressor does

not start immediately af-

ter pressing the Intensive

Cooling touch, or after

changing the tempera-

ture.

This is normal, no error has oc-

curred.

The compressor starts after a pe-

riod of time.

Water flows on the rear

plate of the refrigerator.

During the automatic defrosting

process, frost defrosts on the

rear plate.

This is correct.

Water flows into the re-

frigerator.

The water outlet is clogged. Clean the water outlet.

Products prevent that water

flows into the water collector.

Make sure that products do not

touch the rear plate.

Temperature cannot be

set .

Shopping function switched on. Switch off Shopping manually, or

wait to set the temperature until

the function has reset automati-

cally. Refer to ShoppingMode .

The temperature in the

appliance is too low/

high.

Many products are stored at the

same time.

Store less products at the same

time.

The temperature in the

refrigerator is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

Upper or lower square is

shown in the tempera-

ture display.

An error has occurred in meas-

uring the temperature.

Call your service representative

(the cooling system will continue

to keep food products cold, but

temperature adjustment will not

be possible).

DEMO appears on the

Display.

The appliance is in demonstra-

tion mode (DEMO).

Keep pressed approximately 10

sec. the Mode button since a long

sound of buzzer is heard and the

Display shut off for a short while:

appliance start works regularly.

Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

Only service is allowed to replace the light-

ing device. Contact your Service Center .

Closing the door

1. Clean the door gaskets.

If necessary, adjust the door. Refer to

"Installation".

If necessary, replace the defective door

gaskets. Contact the Service Center.

INSTALLATION

Positioning

Warning! If you are discarding an old

appliance that has a lock or catch on

the door, you must ensure that it is

made unusable to prevent young

children being trapped inside.

Important! The appliance shall have the

plug accessible after installation.

Install this appliance at a location where the

ambient temperature corresponds to the

climate class indicated on the rating plate of

the appliance:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KF8178ADR in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG KF8178ADR Manual

Product: