772576
12
Zoom out
Zoom in
Previous page
1/28
Next page
-The unit doors must be planar and mounted stress-free.
NOTICE
Risk of damage from over-heavy unit door!
If the unit door is too heavy, damage to the hinges and resulting
impairment of function cannot be excluded.
uBefore mounting the unit door, make sure that the door does
not exceed the approved unit door weight.
Appliance model Maximum cabinet door weight
(kg)
Refrigerator
section door
Freezer
section door
KD80178DN 17 12
7 Ventilation of the kitchen unit
Fig. 3
-There must be an effective ventilation shaft of at least
200 cm2 per appliance at the air inlet
Fig. 3 (A)
and outlet
Fig. 3 (B)
vent.
-The principle applies that the larger the ventilation shaft, the
more energy-saving the operation of the appliance.
Fig. 4
-The upper ventilation shaft can either be positioned directly
above the appliance with an optional ventilation grille
Fig. 4 (C)
, close to the ceiling above the unit
Fig. 4 (D)
or as
an air outlet opening in a false ceiling
Fig. 4 (E)
.
8 Changing over door hinges
CAUTION
Risk of injury if soft stop contracts!
uCarefully remove the soft stop mechanism.
CAUTION
Risk of injury if hinges fold!
uLeave hinges open.
WARNING
Risk of injury due to the door dropping out!
If the fastening parts are not screwed into place firmly enough,
the door may drop out. This may lead to severe injuries. What is
more, the door may not close and therefore the appliance may
fail to cool properly.
uScrew the hinges and the ball journal of the soft stop mecha-
nism firmly into place, with 4 Nm.
uScrew the holder of the soft stop mechanism firmly into
place, with at least 3 Nm.
uCheck all of the screws and retighten if necessary.
Note
The door hinges can only be changed over if there is sufficient
space towards the top to pull out the hinge mounting bracket
and to mount it again on the other side. This is generally not the
case after installation in the recess.
uChange the hinges over before the appliance is installed in
the recess.
There is a risk of injury during this stage! Please
observe the safety instructions!
The instructions apply to several models. Only carry
out this step if it is relevant for your appliance.
Choose between the alternatives given.
Loosen the screws only, do not undo them all the way.
Ventilation of the kitchen unit
12 * Depending on model and options
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD80178DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD80178DN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG KD80178DN

ATAG KD80178DN User Manual - English, German, Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info