675551
20
Zoom out
Zoom in
Previous page
1/36
Next page
-
Do not misuse the plinth, drawers, doors etc.
as a step or for support. This applies particu-
larly to children.
Danger of food poisoning:
-
Do not consume food which has been stored
too long.
Danger of frostbite, numbness and pain:
-
Avoid lasting skin contact with cold surfaces
or refrigerated/frozen food or take protective
steps, e.g. wear gloves. Do not consume ice
cream, water ice or ice cubes immediately
and do not consume them too cold.
Danger of injury and damage:
-
Hot steam can lead to injury. Do not use elec-
trical heating or steam cleaning equipment,
open flames or defrosting sprays to defrost.
-
Do not use sharp implements to remove the
ice.
Danger of crushing:
-
Do not hold the hinge when opening and
closing the door. Fingers may get caught.
Symbols on the appliance:
The symbol can be located on the compressor. It
refers to the oil in the compressor and indicates
the following danger: Swallowing or inhaling can
be fatal. This is only relevant for recycling. There
is no danger in normal operation.
Please observe the specific information in
the other sections:
DANGER identifies a situation involving direct
danger which, if not obviated, may
result in death or severe bodily
injury.
WARNING identifies a dangerous situation
which, if not obviated, may result in
death or severe bodily injury.
CAUTION identifies a dangerous situation
which, if not obviated, may result in
minor or medium bodily injury.
NOTICE identifies a dangerous situation
which, if not obviated, may result in
damage to property.
Note identifies useful information and tips.
3 Controls and displays
3.1 Operating and control elements
Fig. 2
(1) On/Off button (6) Alarm button
(2) Temperature display (7) Alarm symbol
(3) "+/-" setting button (8) Menu symbol
(4) Fast-Freeze button (9) Child lock symbol
(5) Fast-Freeze symbol (10) Power failure symbol
3.2 Temperature display
-
the freezer temperature setting
The temperature display flashes if/when:
-
You change the temperature setting
-
The appliance is not cold enough after switching on
-
The temperature rises by several degrees
The following displays indicate a fault. Possible causes and
solutions: (see Malfunction).
-
F0 to F9
-
The power failure symbol
flashes.
4 Putting into operation
4.1 Switching on the appliance
u
Open the door.
u
Press the On/Off button
Fig. 2 (1)
.
w
The appliance is switched on. The temperature display and
Alarm symbol
Fig. 2 (7)
flash until the temperature is cold
enough.
w
If “DEMO” is displayed, demo mode is activated. Please
contact the after sales service.
5 Control
5.1 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.1.1 Setting the child lock function
Activate setting mode:
u
Press the Fast-Freeze button
Fig. 2 (4)
for approx.
5 seconds.
Controls and displays
20 * Depending on model and options
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD80178CDN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD80178CDN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG KD80178CDN

ATAG KD80178CDN Installation Guide - English, German - 32 pages

ATAG KD80178CDN Quick start guide - Dutch - 2 pages

ATAG KD80178CDN Installation Guide - Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info