481266
21
Zoom out
Zoom in
Previous page
1/70
Next page
Adjustable rollers enable you to move the
fridge/freezer combination away from the wall - for
cleaning, for example. These rollers will also
enable you to make the appliance level.
making the appliance level
1. Remove the base grille.
Grasp the grille firmly at the bottom and pull it
towards you and upward.
2. Turn the adjusting screws of the front rollers
clockwise to raise the fridge/freezer
combination at the front, and anticlockwise to
lower the appliance. Use a spanner or an
adjustable spanner.
You can adjust the rollers in such a way that a
half-open door will close automatically. The
doors close best when the distance between
the bottom front edge of the fridge/freezer
combination and the floor is ± 15 mm.
3. Turn the adjusting screws of the rear rollers
clockwise to raise the fridge/freezer
combination at the rear, and anticlockwise to
lower the appliance. Use a screwdriver.
4. Replace the base grille by pushing the grille's
clips forward into the openings at the bottom of
the appliance. The grille will then snap into
place.
fitting
adjusting screw
of front rollers
opening for base
grille’s clip
adjusting screw
of rear rollers
positioning
You can ensure the optimal functioning of your
appliance by positioning it in a well ventilated
space. Do not position the appliance next to a
cooker, heating appliance or where the sun will
shine directly on it.
required free space
Keep sufficient space around the fridge/freezer
combination for good air circulation and trouble-
free installation.
Free space:
sides min. 16 mm
top min 25 mm
(if built-in, 22 mm)
rear min. 25 mm.
In order to enable the fridge/freezer combination
doors to be fully opened, you should ensure that
there is sufficient space (at least 19 mm) between
the door hinges and wall.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD7..G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD7..G in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info