341435

ATAG kd ke 5 g 7 g Manual

35
Zoom out
Zoom in
Previous page
1/70
Next page
technical information
model number KD5/7..G
power supply 230 V
frequency 50 Hz
connected load 600 W
energy label G
height 1700/1772 mm
length of
connection cable 270 mm
disposal of packaging and
appliance
Render discarded appliances unusable
immediately by removing the plug from the
socket and cutting the cable. Disable any locks
on the refrigerator or remove the doors.
It is important that an old refrigerator is
disposed of in a responsible manner and in
accordance with government regulations.
In the past, CFCs and HFCs were used in the
production of cooling and freezing appliances -
in the cooling circuit and insulation foam. If
these substances are released into the air, they
could harm the ozone layer in the atmosphere.
Your new fridge/freezer combination is
100% CFC- and HFC-free.
The packing materials used for your new
fridge/freezer combination should also be
disposed of in a responsible way.
You can obtain information about the
responsible disposal of discarded household
appliances from the relevant authorities.
fitting door handle
Fit the handle. Do not screw in the screws
completely.
Fit the protective cover over the handle. Do not
screw in the screw completely.
Raise the handle slightly and screw in the
protective cover screw completely. The door
panel and protective cover should then fit
smoothly together.
Now screw in the other screws tightly.
The cladding on the refrigerator section is fitted
in the same way.
When fitting the panel in the door of the
refrigerator section, the sawn-out corner should
be in the top right position.
superimposed panel
You may also choose superimposed panels.
These should be 19 mm thick.
Attach the panel to a 6 mm thick underplate by
means of glue or screws.
Bear in mind the required cutouts for the
projecting part of the panel.
Maximum weight of panel
refrigerator section 17 kg
freezer section 9 kg
door claddings (continued)
cutout of 51 mm on
e door handle side
superimposed
panel
cutout of
32mm on the
door hinge side
6 mm thick
underplate
19 mm
refrigerator
door
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG kd ke 5 g 7 g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG kd ke 5 g 7 g in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info