341435

ATAG kd ke 5 g 7 g Manual

30
Zoom out
Zoom in
Previous page
1/70
Next page
warning
Before cleaning, remove the plug from the socket.
Never pull the plug out of the socket by the cable.
warning
– Never use a steam cleaner for cleaning the
fridge/freezer combination. This is dangerous.
– Do not use too much moisture.
– Avoid moisture penetrating electrical parts.
– Do not wash plastic parts in the dishwasher; they
are not dishwasher-resistant.
drip tray under dispenser
If water gets into the drip tray, dry the drip tray
immediately, so that no deposits can form in it. If
spots do form, leave the tray to soak for 30 minutes
in undiluted vinegar or in a solution of one
teaspoonful of citric acid and half a litre of warm
water. Dry the tray thoroughly with a soft cloth.
dispenser switch
Clean this with a solution of one tablespoonful of
bicarbonate of soda and one litre of water. Rinse it
well in water and dry it.
exterior, handles and decorative trim
strips
Clean with a damp cloth and suds of a washing-up
liquid. Dry with a soft cloth. Do not use any
aggressive cleansing agents, such as abrasives,
scour
ers, bleach or cleansing agents which contain
bleach. These products may damage the paint or
cause scratches.
cleaning exterior of appliancechanging light bulbs
warning
Disconnect the appliance from the power supply
before changing a light bulb. Remove the plug from
the socket.
refrigerator section, top
1. Remove the plug from the socket.
2. Remove the protective cover.
3. Replace the light bulb with a new one (230 V,
40W).
4. Replace the protective cover.
5. Insert the plug in the socket and switch on the
fridge/freezer combination.
refrigerator section, bottom (if applicable)
1. Remove the plug from the socket.
2. Remove the protective cover firmly. Then lift it
up, push it forward and remove it.
3. Replace the light bulb with a new one (230 V,
40W).
4. Replace the protective cover.
5. Insert the plug in the socket and switch on the
fridge/freezer combination.
freezer section with dispenser
1. Remove the plug from the socket.
2. Remove the rack under the light (an empty rack
will be easier to remove).
3. Pull the protective cover towards you.
4. Replace the light bulb with a new one (230 V,
40W).
5. Replace the protective cover.
6. Replace the rack.
7. Insert the plug in the socket and switch on the
fridge/freezer combination.
grasp the cover on the right and pull it downwards
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG kd ke 5 g 7 g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG kd ke 5 g 7 g in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info