Manual ATAG KD 8102 AD (page 17 of 27) (English, German, Dutch, French)

75802

Zoom out

Zoom in

1/27

* Depending on model and options

Fan switch*

You can use the fan switch 5 for re-circulated cooling as required

to:

- chill large quantities of fresh food faster;

- keep the temperature evenly distributed throughout the entire

refrigerator compartment. The intensive air circulation eliminates

the different temperature areas present in normal operation. All

food will be refrigerated to more or less the same extent.

W You are recommended to always use the fan switch:

- in

high room temperatures (approx. 30°C or higher) or

- if the air humidity is high, e.g. during the summer.

W To switch on/off: Press the fan button 5 briefly so that it

lights up

(dark = off).

Note: The energy consumption will increase when the fan is

switched on.

- To save energy, the fan will switch off automatically when the

door is open.

Additional functions

In set-up mode you can set the child-proof lock and adjust the

brightness of the display*.

Activating set-up mode:

Press the Fast-Cooling button for approx. 5 secs - the Fast-

Cooling button flashes - the display shows

c for child-proof

lock.

Note: the value to be altered flashes.

W Select the required function by pressing the Up/Down button:

c = child-proof lock or

h = brightness.

W Now select/acknowledge the function by pressing the Fast-

Cooling button briefly:

W For c = child-proof lock, press the Up/Down

button to select c

1 = child-proof lock on or c0 =

child-proof lock

off and acknowledge with the

Fast-Cooling button. When the symbol

6 is lit, the

child-proof lock is activated.

W For h = brightness, press the Up/Down button to

select h

1 = minimum to h5 = maximum bright-

ness

and acknowledge with the Fast-Cooling

button.

Exiting set-up mode:

To exit the set-up mode, press the On/Off button; after 2 mins.

the electronic system switches over automatically.

- The normal operating mode is activated again.

Storage, shelf arrangement

Arranging food in the refrigerator

The refrigerator is coldest just above the vegetable bins and against

the rear wall (suitable for sausage and meat products etc.); it is

warmest at the front at the top and in the door (suitable for spread-

able butter, cheese etc.).

Notes on cooling

- Store food so that the air can circulate freely and ensure that

the food is not packed too closely together.

Do not cover the

fan slits* at the back, otherwise the refrigerating capacity will

be impaired!

- Food which gives off or absorbs odours and flavours, and liquids

should always be stored covered or in closed containers.

- Always store food which gives off or is sensitive to ethylene gases

such as fruit, vegetables and salads separately or wrapped in

order not to affect their storage life; e.g. do not store apples

together with kiwis or cabbage.

Changing shelf arrangement

W You can change the position of

the

jar rack and remove all door

racks for cleaning. Slide the door

rack up, pull out towards you and

replace in reverse order.

W By adjusting the bottle/can

holder

you can protect the bottles

from falling over when the door is

opened and closed. Always hold

by the plastic handle.

- The holder can be removed for

cleaning:

- Pull the bottom edge of the holder towards you and lever out.

W Shelves can be adjusted in height

for different height items,

- Lift the glass shelf, align the recess

over the support and replace the

shelf in a higher or lower posi-

tion.

- The glass shelves are fitted with

stops to prevent them being pulled

out accidentally.

W For large appliance, at least 1216

mm high:

You can use the front area of

the shelf above the fruit and

vegetable bins as a convenient

area for putting things down

temporarily, e.g. if you

are rearranging or sorting out

the contents of the refrigerator.

However,

do not leave any-

thing there as the items can be

pushed backwards or tipped over when you close the door.

The sectioned glass

shelves

can be moved

to make space for tall

containers: Place the

shelf rails on the sup-

ports on the left and

right at the desired

height, making sure you

use the right-hand rail

(R) on the right and the left-hand rail (L) on the left. Insert the

glass shelves

1 and 2 . The glass shelf 2 with the raised

edge must go at the back.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD 8102 AD in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG KD 8102 AD Manual

Product: