76317

ATAG KD 8088 AD Manual

16
Zoom out
Zoom in
Previous page
1/27
Next page
16
* Depending on model and options
Operation and control elements
You are advised to clean the appliance before switching it on for
the first time (see "Cleaning").
If your appliance has a freezer compartment, switch it on approx. 2
hours before filling the freezer with frozen food for the first time.
Switching the appliance on and off
W To switch on: Press the on/off button 3 so that the tempera-
ture display lights up or flashes.
- The lighting will light up when the door is open.
W To switch off: Press the on/off button for approx. two seconds
so that the temperature display goes out.
Setting the temperature
The appliance is pre-set for normal operation. We recommend
temperatures of +5°C in the refrigerator.
This will ensure an average frozen food temperature of approx.
-18°C in the freezer compartment*.
W To reduce the temperature:
Press the DOWN button 2.
W To increase the temperature:
Press the UP button 2.
- While you are entering the temperature, the
set temperature
will flash
on the display.
- When you press the temperature setting buttons for the first
time, the
most recent setting (known as the "reference
setting
") is displayed.
- You can change the settings in increments of 1°C by briefly
pressing the buttons again. If the buttons are held down the
temperature setting will change faster.
- The system switches over automatically about 5 seconds after
the button was last pressed and displays the
average cooling
temperature (known as the
"actual setting").
- You can change the temperatures in the refrigerator between
9°C and 2°C.
Temperature display
The average temperature in the refrigerator compartment is
displayed in normal mode.
If "
F0" to "F5" appears in the display, the appliance has a fault.
Consult the customer service department indicating the fault
number displayed, so that they can arrange for your appliance to
be serviced accurately and quickly.
Fast-Cooling
The Fast-Cooling button switches the appliance to maximum
cooling.
It is recommended particularly if you wish to cool
large quantities
of food, drinks, freshly baked cakes or meals rapidly.
W To switch on: Press the Fast-Cooling button 4 briefly so that
it lights up. The refrigerator temperature will drop to its lowest
value.
Note: The Fast-Cooling function uses slightly more energy. After
approx. 6 hours, however, the appliance switches back
auto-
matically
to normal energy-saving operation.
W Do not eat ice cream, particularly ice lollies or ice cubes, imme-
diately after taking them from the freezer compartment as there
is a risk of "burning" because of the very cold temperatures.
W Do not consume food which has been stored for too long, as
it could cause food poisoning.
Installation and ventilation information
W Avoid positioning in direct sunlight or next to an oven, radiator
or similar.
W Do not block the ventilation areas. Always
ensure that the appliance is properly venti-
lated.
W
Standard EN 378 specifies that the room in which
you install your appliance must have a volume of 1 m
3
per 8 g of R 600a refrigerant used in the appliance,
so as to avoid the formation of inflammable gas/air
mixtures in the room where the appliance is located
in the event of a leak in the refrigerant circuit. The quantity of
refrigerant used in your appliance is indicated on the type plate
on the inside of the appliance.
W Only install the refrigerator/freezer in stable furniture.
W Please follow the enclosed installation instructions.
Connecting to the mains
Power supply (AC) and voltage
at the operating point must comply with the details on the type
plate. The type plate is located on the inside left of the appliance,
fig.
A.
W The appliance must be connected with a properly
installed fused socket.
W
The socket must have a 10 A fuse or higher. It must be away
from the back of the appliance and easily accessible.
W Do not
- connect to stand-alone inverters and
- operate with so-called energy-saving plugs
- this can damage
the electronic system,
-
connect to the supply with other electrical equipment using a dis-
tributor strip or an extension cable - risk of overheating or fire.
W When removing the mains cable from the back of the appliance,
remove the
cable holder to prevent vibration noise.
The wires in the mains lead are coloured in accordance with the fol-
lowing code: green/yellow = earth, blue = neutral, brown = live.
Warning! This appliance must be earthed.
Non-rewireable plugs BS 1363
If this machine or appliance is fitted with a non-rewireable plug, the fol-
lowing information applies: If the socket outlets are not suitable for the
plug supplied with this product, it must be cut off and an appropriate plug
fitted. The plug cut from the flexible cord should be disposed of and on no
account be inserted into a 13 A socket elsewhere in the house (electric
shock hazard).
The fuse cover must be re-fitted when changing the fuse, and if the fuse cover
is lost the plug must not be used until a suitable replacement is obtained.
The colour of the correct replacement cover is that of the coloured insert in
the base of the plug, or the colour that is embossed in words on the base
of the plug (as applicable to the design of the plug fitted). The correct rating
of the replacement fuses that are ASTA approved to BS 1362 should be
fitted. Replacement fuse covers may be purchased from your local electrical
suppliers, electricity showroom or approved service agent.
Notes on energy saving
W Ensure that there is adequate space around the appliance
for ventilation and air extraction.
W Avoid keeping the door open for too long.
W
Store food logically. Do not exceed the storage period specified.
W Keep all food properly packed and covered so as to avoid its
frosting up on the outside.
W Always allow hot food to cool to room temperature before plac-
ing in the appliance.
W Defrost frozen food in the refrigerator.
W If an ice layer forms in the freezer compartment*, you should
defrost it. This will improve the cold transfer and reduce energy
consumption.
!
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD 8088 AD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD 8088 AD in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info