113068
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
GB
W Ensure that no cleaning water is allowed to penetrate into
the electrical components or ventilation grilles. Dry the appli-
ance.
- Do not damage or remove the type plate on the inside of the
appliance as this is important for customer service.
W Then connect/switch on the appliance, switch on Fast Freeze
and start to insert the food to be frozen as the temperature
drops.
If the appliance is to be
leftswitchedoforanylengthoftime
empty the appliance, disconnect from the mains, clean as described
above and leave the door open so as to avoid odours.
Your appliance is designed and manufactured for a long life span
and reliable operation.
If a malfunction nonetheless occurs during operation, check
whetheritisduetoanoperatingerror.Pleasenotethatduring
the warranty period the resultant servicing costs in this case will
have to be borne by the owner.
You may be able to rectify the following faults by checking the
possible causes yourself:
Malfunction -Possiblecauseandremedy
Appliancedoesnotwork,thedisplayiso
- Is the appliance switched on properly?
- Is the mains plug properly inserted in the socket?
- Is the socket fuse intact?
Loud running noise
- Istheappliancestandingrmlyontheoor,ordoesthecom-
pressor cause nearby items of furniture or objects to vibrate?
If necessary, move the appliance slightly, align by adjusting the
adjustable feet, or move bottles and containers apart.
- Burbling noises are normal.
These are caused by the
refrigerantowingroundtherefrigerantcircuit
.
A short clicking sound: This will be heard whenever the re-
frigerationunit(themotor)switchesonoroautomatically.
Motor noise: This will be slightly louder for a brief period when
the refrigeration unit switches on. The refrigerating capacity will
increase when the Fast Freeze function is activated, fresh food
has just been placed in the appliance or the door has been left
open for a while.
The audible warning signal sounds, the temperature is
not cold enough
- Have you put too much fresh food into the freezer without
activating Fast Freeze? (See "Fast Freeze")
- Does the door close properly?
- Istheappliancesucientlywellventilated?
Clear ventilation grilles if necessary.
- Is the ambient temperature too hot?
(See "Safety regulations")
- Has the appliance been opened too often or left open too
long?
- If applicable, wait until the appliance reaches the required
temperature itself.
Troubleshooting
Customer service and type plate
If none of the above causes apply and you cannot
rectify the fault yourself, or if the temperature display
reads "F 0" to "F 5", this means that there is a fault.
Pleasecontactyournearestcustomerservicedepartment(see
enclosed list for addresses), indicating the
warning displayed,
together with the
type designation
1 service No. 2,
serial No. 3
of the type plate. This will
help us to provide you with
a faster and more accurate
service. The type plate is
located inside the appliance
on the left-hand side.
Leave the appliance shut
until the customer service
engineer arrives so as to
prevent any further cold
loss.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KD 8072 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KD 8072 C in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info