692629
16
Zoom out
Zoom in
Previous page
1/36
Next page
EN 16
INTRODUCTION
Tools required: socket wrench No. 8, Phillips screwdriver, torx 25, Hex key No. 4 and flat
screwdriver.
The procedure to change the door opening direction should be carried out by at least two
persons.
1. Remove the upper hinge cover (A) and the covering cap (G).
2. Undo the upper hinge (B) and remove the door (C) from the lower hinge (D).
3. Tilt the appliance backwards (make sure you do not press against the condenser unit on
the rear wall of the appliance as this may damage the cooling system), unscrew the lower
hinge (D) and the foot (E), and move them to the opposite side. Make sure the washer is
installed like it was before disassembly.
4. Move the door hinges (F) to the opposite side, remove the door stopper S1 and attach the
door stopper S2 supplied in a bag with the instruction manual. Place the door (C) back
on the lower hinge (D).
5. Use the screws to attach the upper hinge (B) on the opposite side.
6. Install the upper hinge cover (A) and the covering cap (G).
7. Place the handle (L): undo the side screws (M) and the (N) screw in the handle holder.
Take care not to damage the door. Pull the handle in the direction of the arrow. Disassemble
the handle (L): undo the screw (O), turn the handle holder (P) by 180° and reattach it using
the screw. On the opposite side of the door, remove the cover plugs (R) and replace the
handle (L) in the direction of the arrow 2. Reattach the handle using the screws (M) and (N).
Place the covering plugs/caps (R) on the opposite side of the door.
Changing the door opening direction
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KA2512AD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KA2512AD in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG KA2512AD

ATAG KA2512AD User Manual - German - 36 pages

ATAG KA2512AD User Manual - Dutch - 36 pages

ATAG KA2512AD User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info