482663
134
Zoom out
Zoom in
Previous page
1/164
Next page
14_ setting up
setting up your side-by-side
refrigerator
REATTACHING THE REFRIGERATOR DOORS
Once you have safely placed your refrigerator where you plan for it to stay, it is time to put the doors back on.
Reattaching the Freezer Door
1. Replace the freezer door by inserting the water line
1
back into the
lower corner of the door and then into the hole on the lower hinge
2
.
Gently pull the water line back down so that it runs straight, with no kinks
or bends.
2. Insert the upper hinge shaft
3
into the hole on the corner of the
freezer door
4
. Make sure the hinge is level between the upper
hinge hole
5
and the hole of the cabinet
6
and reattach the
hinge screws
7
and ground screw
8
by turning in a clockwise
direction.
3. Reconnect the wires.
4. Place the front part of the upper hinge cover
9
on the front of the upper hinge
10
and reattach
with the screw.
1
2
10
9
4
5
6
7
8
3
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG KA2292D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG KA2292D in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info