Operation
The Self-diagnosis function operates when something is wrong with the unit.
When an error occurs in the unit, pressing any of the buttons will have no effect.
Immediately contact the service center without turning the power OFF. If the power
is OFF, it takes much longer for the service engineer to find the cause of the problem.
Water is cooled while stored in the water tank in the refrigerator compartment, and
then sent to the dispenser. Ice is made in the automatic ice maker and sent to the
dispenser divided into crushed or cubed form ice.
An alarm will ring 3 times if the refrigerator door is left opened for more than 1 minute.
This alarm will ring at 30 sec. and stop when the door is opened. ‘Door Open Alarm’
function makes alarm sound only, having no separate indicating function. If the alarm
sound does not stop even after the freezer and refrigerator compartment doors are
closed, contact the service center.
Door open alarm
Self-diagnosis
(fault detection)
function
How ice/cold
water is supplied
How to use
dispenser
Automatic ice maker and Dispenser
$
Select one among crushed ice, water, and cubed ice and slightly press the push
switch with a glass or other container.
Crushed Ice
•
Light the crushed ice
indicating lamp by
pressing the selection
button.
•
C
rushed
ice will be
dispensed by pressing the
push switch with a glass.
Water
•
Light the water
indicating lamp by
pressing the selection
button.
•
Water will be dispensed
by pressing the push
switch with a glass.
Cubed Ice
•
Light the cubed ice
indicating lamp by
pressing the selection
button.
•
Cubed ice will be dispensed
by pressing the push
switch with a glass.
•
It is normal that the water is not very cold enough at first. If you want colder
water, add ice into the glass.
NOTE
11