349325
146
Zoom out
Zoom in
Previous page
1/164
Next page
26_ operating
Filter Indicator
When the lter indicator light is on, it is time to change the lter. Typically this happens about
every 6 months.
After removing the old water lter and installing a new one (see page 38 for instructions on how to
do this), reset the indicator status light by pressing the Ice Type button for about 3 seconds.
The indicator will light again in about 6 months to let you know it is time to change your water filter.
When you do not use the water lter, press the Ice Type button for more than 5 seconds, the Filter
indicator lamp and the Filter Change letters will be off.
Child Lock
This icon will light up when you activate the Child Lock function by pressing the Vacation button
and the Fridge button simultaneously for 3 seconds. Press these two buttons for 3 seconds
again to reactivate.
Also, this button has another function. When this button is pressed for 3 seconds (lock indication
lamp turn on), the heater for sweat control is off at a same time. If sweat is appeared around the
cover dispenser or beverage station with this function, press this button for 3 seconds again. then,
the light will turn off and the sweat control function will be performed. and all keys will be unlocked
at a same time.
Ice type
Cubed Ice, Crushed Ice and turnning the Ice maker off.
Enjoy cubed or crushed ice by selecting your preference
from the digital control panel. If you don’t need ice, turn
the feature off to save on water and energy consumption.
The Ice type light indicates the type of ice(or no ice) that is
currently chosen.
CONTROLLING THE TEMPERATURE
CONTROLLING THE FREEZER TEMPERATURE
The freezer temperature can be set between -14°C (8°F) and -25ºC (-14°F) to suit your particular
needs. Press the Freezer button repeatedly until the desired temperature is shown in the
temperature display. Keep in mind that foods like ice cream may melt at -16ºC (4°F).
The temperature display will move sequentially from -14°C (8°F) and -25ºC (-14°F). When the
display reaches -14ºC (8°F), it will begin again at -25ºC (-14°F).
Five seconds after the new temperature is set the display will again show the actual current freezer
temperature. However, this number will change as the Freezer adjusts to the new temperature.
CONTROLLING THE FRIDGE TEMPERATURE
The refrigerator temperature can be set between 7ºC (46°F) and 1ºC (34°F) to suit your particular
needs. Press the Fridge button repeatedly until the desired temperature is shown in the
temperature display. The temperature control process for the Fridge works just like the Freezer
process. Press the Fridge button to set your desired temperature. After a few seconds, the Fridge
will begin tracking towards the newly set temperature. This will be reected in the digital display.
The temperature of the freezer or the refrigerator may rise from opening the doors too
frequently, or if a large amount of warm or hot food is placed in either side. This may cause the
digital display to blink. Once the freezer and refrigerator return to their normal set temperatures
the blinking will stop. If the blinking continues, you may need to “reset” the refrigerator. Try
unplugging the appliance, wait about 10 minutes and then plug back in.
DA99-02208A(0.1).indb 26 2009.11.17 1:23:52 PM
146


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ka 2192 dl at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ka 2192 dl in the language / languages: Dutch as an attachment in your email.

The manual is 19,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info