Manual ATAG ka 2111 dq (page 143 of 164) (English, German, Dutch, French)

349324

143

Zoom out

Zoom in

1/164

operating the side-by-side

refrigerator

SETTING UP THE REFRIGERATOR

Now that you have your new refrigerator installed and in place, you are ready to set up and enjoy the full

features and functions of the appliance.

By completing the following steps, your refrigerator should be fully operational. If not, ﬁrst check the power

supply and electricity source or try the troubleshooting section at the back of this user guide. If you have any

further questions, contact your service center.

1. Place the refrigerator in an appropriate location with reasonable clearance between the wall

and the refrigerator. Refer to installation instructions in this manual.

2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the

doors.

3. Set the temperature control to the coldest temperature and wait for an hour.

The freezer should get slightly chilled and the motor should run smoothly.

4. After powering the refrigerator, it will take a few hours to reach the appropriate temperature.

Once the refrigerator temperature is sufﬁciently cool, you can store food and drink in the

refrigerator.

02 OPERATING

operating _23

DA99-02208A(0.1).indb 23 2009.11.17 1:23:49 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ka 2111 dq in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 21,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG ka 2111 dq Manual

Product: