692526
64
Zoom out
Zoom in
Previous page
1/66
Next page
EN 32
FAULTS
Symptom Possible cause Solution
Wok burner
There is a smell of gas near
the appliance.
The appliance connection is
leaking.
Turn off the main gas supply
valve. Contact your installer.
The burner does not ignite.
Error code F4-066 *
Electrical connection not
correct.
Fuse defective/fuse switched
off in fuse cupboard.
Spark plug (1) dirty/damp.
Burner parts not placed
correctly.
Burner parts dirty/damp.
Main gas supply valve closed.
Fault in gas mains.
Gas bottle or tank is empty.
Wrong type of gas used.
Contact your installer.
Replace the fuse or switch on
the fuse again in the fuse box.
Clean/dry the spark plug.
Use the centring notches to
put the burner parts together.
Clean/dry the burner parts.
Make sure that the outflow
holes are open.
Open the main gas valve.
Consult you gas supplier.
Connect a new gas bottle or
have the tank refilled.
Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
The burner does not burn
evenly.
Burner parts not placed
correctly.
Burner parts dirty/damp.
Wrong type of gas used.
Use the centring notches to
put the burner parts together.
Clean/dry the burner parts.
Make sure that the outflow
holes are open.
Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
Burner extinguishes after
igniting.
Error code F3 *
Thermocouple (2) is dirty. Clean/dry the thermocouple
1
2
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG IGT9472MBA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG IGT9472MBA in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG IGT9472MBA

ATAG IGT9472MBA User Manual - German, French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info