333210

ATAG hl 6093 g Manual

53
Zoom out
Zoom in
Previous page
1/66
Next page
105
Setting the power level
The cooking zones have 9 settings.
1. Press the + button for the cooking zone concerned.
The cooking zone immediately sets itself to position 6 (HL60..G) or 9
(HL60..M and HL70..M). Or press the button for the relevant
cooking zone. The cooking zone will immediately set itself to
position 1. The cooking zone will now heat up. The cooking zone
switches on and off automatically to provide the power you have set.
At lower settings the cooking zone is off for a long time and on from
time to time. At higher settings the cooking zone is on for a long time
and off from time to time.
2. Select a higher or lower setting by pressing the + or - key again. The
display will indicate the selected setting. The table on pages 117 and
118 shows which settings you should select.
Switching off
Press the - button until the cooking zone is on setting 0. After 5 seconds
this will change to an H, referring to residual heat (see residual heat
indication).
higher lower
USE
setting
104
USE
setting
On the glass work surface the 4 cooking zones are indicated by a circle.
The diameter of the base of the pan should correspond as closely as
possible with the diameter of the cooking zone.
The ceramic hob is equipped with residual heat indication, cooking
timer, (child) lock, automatic limitation of cooking time and one or
more double-ring cooking zones.
The HL60..M and HL70..M are also equipped with 'Easy Cook'
automatic cooking programmes and memory cooking.
On this page and the following ones, you can read how to use these
facilities.
Switching on and off
switching on
1. Put a pan on a cooking zone.
2. Press the on/off button.
In the case of the HL60..G a light above the on/off button comes on.
The hob is now in stand-by mode. You must now operate the hob within
5 seconds, otherwise the hob will switch itself off again (the light goes
out).
With the HL60..M and HL70..M, zero’s appear in the cooking zone
display. The hob is now in stand-by mode. You must now operate the
hob within 10 seconds otherwise the hob will switch itself off again
(displays go out).
During the cooking process the on/off button can be used as an
emergency switch-off. Press the button and the appliance will switch off
immediately.
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG hl 6093 g at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG hl 6093 g in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info