GB 6 GB 7
operation
switching on
switching off
Switch back to 0 with the – button.
The cooking zone is switched off.
residual-heat indicator
The indicator shows that the cooking zone is still hot, and
goes out as soon as the glass top reaches a safe
temperature.
Residual heat is indicated by an H in the display of the
appropriate cooking zone.
timer (if present)
You can have the rear right cooking zone switched off by the
cooking timer. You are then using the timer as an automatic
cooking device.
1 Put a pan on the rear right cooking zone.
2 Press the on/off button.
3 Set the power level required.
4 Set the timer.
The cooking time is set using the + and – buttons (max.
99 minutes).
The number of minutes selected is shown in the display.
A blinking dot indicates that the timer has been activated.
At the end of the cooking time, you hear a beep.
The zone switches off.
Switch the beep off at the end of the cooking time by
pressing the clock’s – button.
Press the clock's + button to set a new cooking time.
The other zones cannot be switched off by the cooking timer.
You can use the cooking timer as an egg timer. In this case,
the cooking timer only gives a sound signal at the end of the
cooking time.
Switch the cooking timer off by pressing the – button for a
few seconds (in the ‘0’ minute setting).
residual-heat indicator
operation
switching on
introduction
The ceramic hob is fitted with a residual heat indicator, a timer
(if present), a childproof lock, an automatic cooking-time limiter
and a double cooking zone (if present). On this page and the
following ones, you can read how to use these facilities.
switching on
1 Put a pan on a cooking zone.
2 Press the on/off button.
The light above the button lights up.
The hob is now in the stand-by setting. The cooking zones
can now be operated. If you do not operate the hob within
5 seconds, the hob will switch itself off again. The light goes
out. During the cooking process the on/off button can be
used as an emergency switch-off. Press the button and the
appliance will switch off immediately.
setting the power level
The hob has 9 settings.
1 Press the + button for the cooking zone concerned.
The hob goes directly to setting 6.
Press the – button for the cooking zone concerned.
The hob goes directly to setting 1.
2 Select a higher or lower setting by pressing the + or –
buttons again.
The display shows the setting selected. You can see
which setting to select in the cooking tables on page 9.
switching on double-ring zone (if present)
switching on
Once the zone has been switched on at setting 9, press the
+ button again.
The light above the button lights up. The outer ring is
switched on.
You cannot use the outer ring on its own.
higher lower
on/off button
shorter longer
