661890
52
Zoom out
Zoom in
Previous page
1/72
Next page
EN 18
OPERATION
Bridge induction (‘SV’ and ‘SVI’ models)
The Bridge induction zones can be linked to each other. This creates
one large zone that can be used, for example, for the ATAG grill plate,
the ATAG teppanyaki, a large fish pan or various pans on the same power.
If the Bridge induction zones are linked, they cannot be set to boost
and the menu functions cannot be used.
Use a fish or other pan that covers at least one of the Bridge
induction zones in the middle.
Switching on bridge function
1. Place the large pan on both cooking zones so that these are both
well covered.
2. Switch the front cooking zone on.
3. Press on the bridge function key of the front slide control for two
seconds in order to set the status 'bridge'.
‘BR’ will appear in the display on the rear zone. The rear zone can
no longer be used.
4. Slide with your finger over the front slide control (clockwise) or tap
with your finger on the slide control to set the desired setting. Both
zones are heated to the level set.
Switching off bridge function
1. Press on the bridge function key of the front slide control for two
seconds in order to switch off the status 'bridge'.
The bridge function is switched off, the rear display goes off,
level 1 is present in the front display.
Or:
2. Press on the on/off button of the front cooking zone in order to
switch both zones off.
You will hear a signal and the level in the display disappears. The
cooking zone has been switched off completely.
Switching off
Switching off one cooking zone
Press the on/off button of the cooking zone you want to switch off.
You will hear a single signal and the slider goes off.
If all cooking zones have been switched off in this way, the hob
will automatically be in the stand-by mode (also refer to ‘stand-by
mode’).
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI9571SVT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI9571SVT in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI9571SVT

ATAG HI9571SVT Installation Guide - English, German - 2 pages

ATAG HI9571SVT User Manual - German - 72 pages

ATAG HI9571SVT Installation Guide - Dutch, French - 2 pages

ATAG HI9571SVT User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info