556886
43
Zoom out
Zoom in
Previous page
1/61
Next page
EN 13
Switching on and power setting
1. Place a pan in the middle of a cooking zone.
2. Press the key button.
A single beep will be heard.
3. Press the on/off button of the cooking zone concerned.
In the display ‘-’ will blink and you will hear a single signal. If no
cooking setting is selected after a zone is switched on, the cooking
zone switches off automatically after 10 seconds.
4. Slide with your finger over the slide control (clockwise) or tap with
your finger on the slide control to set the desired setting. The hob
starts automatically at the selected level.
5. Set a higher or lower power level by sliding with your finger over the
slide control or by tapping on the slide control. The cooking zones
have 12 levels. In addition there is also the 'boost' level for the
induction zones.
Pan detection
If the hob doesn't detect a(n) (iron-containing) pan after a cooking
power has been set, the display will continue to flash and the cooking
area remains cold. When no (iron-containing) pan is placed within one
minute, the cooking zone will switch off automatically (also refer to
pages 14 and 15; “Pans”).
Residual heat indicator
After a cooking zone has been used it may still remain hot for a while.
As long as the cooking zone is still hot an “H” will be visible in the
display.
Boost
You can use the ‘boost’ function to cook at the highest power level
during a short period of time (max.10 minutes). After the maximum
boost time the power will be reduced to setting 12.
OPERATION
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI9271SV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI9271SV in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI9271SV

ATAG HI9271SV Installation Guide - English, German - 2 pages

ATAG HI9271SV User Manual - German - 61 pages

ATAG HI9271SV Installation Guide - Dutch, Danish, French - 2 pages

ATAG HI9271SV User Manual - French - 61 pages

ATAG HI9271SV Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info