692533
42
Zoom out
Zoom in
Previous page
1/48
Next page
EN 20
Symptom Possible cause Solution
Continuous beep and Er03
flashing on the display.
The control panel is dirty or
has water lying on it.
Clean the control panel.
Error code E5 and E6.
Defective generator. Contact the service
department.
Error code E2.
Appliance over heated. The appliance has been
switched off because of over
heating. Let the appliance
cool down and start again
on a lower setting.
Error code E3 flashing on the
display.
Unsuitable cookware
that lacks ferromagnetic
properties.
Use suitable pot or pan.
Error code U400 and/or
continuous beep.
The appliance has been
connected incorrectly and/or
the mains voltage is too high.
Let your connection be
changed.
‘Flash’ symbol.
You have pressed two or more
keys at the same time.
Do not operate more than one
key at the same time.
Error code Er47.
Communication error between
controls and induction
generator.
Verify connection of main
power is correctly and
functional. Other wise contact
the service department.
Other error codes.
Defective generator. Contact the service
department.
In case of an operation failure or if the faults / error indication does not disappear,
disconnect the cooking hob from the power mains for a few minutes (undo the fuse or
turn of the main switch); then, reconnect it to the power mains and turn on the main
switch key. If the problems persist, call a service technician.
TROUBLESHOOTING
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI7471EV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI7471EV in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI7471EV

ATAG HI7471EV Installation Guide - English, German - 2 pages

ATAG HI7471EV User Manual - German - 48 pages

ATAG HI7471EV Installation Guide - Dutch, French - 2 pages

ATAG HI7471EV User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info