481257
79
Zoom out
Zoom in
Previous page
1/86
Next page
GB 37
HI7271I and HI9271I
INSTALLATION INSTRUCTIONS
Additional requirements for the integration (fl ush installation) of the hob
(HI7271I and HI9271I)
The hob can only be integrated above a single cupboard at least
800/900 mm wide (see illustration).
Once it has been integrated, the hob must remain accessible from
underneath for service purposes.
If a drawer or oven is built in under the hob it must be easily
removable.
These hobs are particularly suitable for integration in stone or
tiled worktops.
When integrating the hob it should only be kitted along the side
of the glass top and not at the bottom. This is to ensure that the
glass top itself remains accessible should it need to be replaced.
To do this, apply a layer of tape, such as masking tape, to the inlay
surface.
Report any transit damage before sealing the hob. Any damages
reported afterwards will be deemed a result of it being built in.
The guarantee does not cover damages resulting from the hob
being built in.
The guarantee does not cover water damage or any other damage
to the worktop the hob is built into.
Prior to any service call, all interior parts of the cupboard the
hob is built into, such as drawer constructions, shelves, racks and
runners, are to be removed.
The service department is responsible for the repair and service of
the hob only. You should contact your kitchen specialist about the
re-integration (fl ush installation) of the hob.
The kit used to seal the edges of the glass top must be resistant to
temperatures of at least 160 °C.
To prevent discolouration of the natural stone, use a specially
developed sealant between the glass and natural stone.
min. 900 mm
for HI9271I
min. 800 mm
for HI7271I
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI7211M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI7211M in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info