692531
36
Zoom out
Zoom in
Previous page
1/48
Next page
EN 14
Changing the cooking zone power setting
1. Press the cooking zone key of the desired cooking zone.
The dot directly below the corresponding display will light up and is assigned to the
visual slide control.
2. Slide your finger over the slide control to change the power setting.
Please note!
The appliance is connected to 1 phase. All 4 zones cannot be used at the same time.
The 2 small zones and 1 large zone or the 2 large zones can be used at the same time.
When setting the power level for one of the zones, the system automatically selects the
optimal power distribution. It could be that another zone will be reduced in power or
switched off completely. When this is happening , the display of the related zone will than
flash.
Switching off
Switching off one cooking zone
One cooking zone is switched on. The display shows a power level between 1 and 9, or ‘P’.
1. Press the cooking zone key of the desired cooking zone.
2. Use the slide control to set the cooking zone to ‘0’ (off).
The cooking zone switches off.
The hob switches off after 20 seconds if all cooking zones are set to ‘0’ and no other
process is being used.
Switching off all cooking zones
Several cooking zones are active.
1. Press the On/Off key to switch off all cooking zones.
You will hear a beep. All displays are off. The hob is switched off.
Bridged induction zones (depending on model)
Activating the bridged cooking zone
1. Press the On/Off key.
2. Simultaneously touch the left-hand side or right-hand side cooking zone keys.
The ‘bridged indicator’ will appear on the rear zone display to indicate that the two
cooking zones are bridged.
3. Set the desired cooking power for the bridged cooking zone.
4. To change the bridged zone’s cooking power later on, first press the sensor of the front
cooking zone.
OPERATION
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI6471E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI6471E in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI6471E

ATAG HI6471E Installation Guide - English, German - 2 pages

ATAG HI6471E User Manual - German - 48 pages

ATAG HI6471E Installation Guide - Dutch, French - 2 pages

ATAG HI6471E User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info