692531
31
Zoom out
Zoom in
Previous page
1/48
Next page
EN 9
USE
Be careful with thin enamelled sheet-steel pans! The enamel may become damaged
at high settings if the pan is too dry; High power level settings may cause the base of
the pan to warp.
Never use pans with a misshapen base. A hollow or rounded base can interfere with the
operation of the overheating protection, causing the appliance to become too hot. This may
lead to the glass top cracking or the pan base melting. Damage caused by using unsuitable
pans or boiling dry is excluded from the guarantee.
Minimum pan diameter
The diameter of the bottom of the pan must be at least 12 cm. The best results are achieved
by using a pan with the same diameter as the cooking zone. If a pan is too small the zone
will not work.
The length of a fish-pan (oval pan), used on the Bridge zones, must be at least 22 cm.
Pressure cookers
Induction cooking is very suitable for pressure cookers. The fast-reacting cooking zone
brings the pressure cooker to pressure quickly. As soon as you switch a cooking zone off,
the dish stops cooking immediately.
Power level setting
The cooking zones have 9 levels. Beside it there is a level ‘boost’ (P). If you have switched on the
hob the required cooking zone can be chosen within the next 5 seconds. Set the power level by
touching the slider. At the first touch, the level is set according to the part of the slider that you
touch. By sliding along the slider, the power level setting is changed. By sliding to the right, the
level increasing, while sliding to the left decreases the level. When you move your finger away
from the slider, the cooking field starts to operate at the level set.
Boost function
You can use the ‘boost’ function to cook at the highest power level during a short period of
time (max.10 minutes). After the maximum boost time the power will be reduced to setting 9.
Boost function is not available in Bridge mode!
Boost power management
Due to the restricted power of the induction hob, the boost function can only be set on
one cooking zone simultaneously (for both left or right cooking zones). When switching
a cooking zone to the boost setting the other active cooking zone will automatically
be set to a lower power or will be switched off.
The setting, which are set to a lower power, will be flashing in the display.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI6471E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI6471E in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HI6471E

ATAG HI6471E Installation Guide - English, German - 2 pages

ATAG HI6471E User Manual - German - 48 pages

ATAG HI6471E Installation Guide - Dutch, French - 2 pages

ATAG HI6471E User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info