2553

ATAG HI511M Manual

41
Zoom out
Zoom in
Previous page
1/49
Next page
GB 7
operation
switching on
introduction
The induction hob is fitted with a residual heat indicator, a
timer for the rear cooking zones and the double cooking
zone, two childproof locks, an automatic cooking-time limiter
and a double cooking zone. On this page and the following
ones, you can read how to use these facilities.
switching on
1 Put a pan on a cooking zone.
2 Press the on/off button to switch the cooking zones on.
The double cooking zone has its own on/off switch.
A horizontal line (–) appears in the display.
setting the power level
1 Press the + or the – button for the zone concerned.
The hob goes directly to setting 6.
2 Select a higher or lower setting by pressing the + or –
buttons again.
The display shows the setting selected. You can see which
setting to select in the cooking tables on pages 12 and 13.
The setting is displayed continuously, if there is a pan on the
cooking zone. The display blinks, if there is not a pan on the
cooking zone.
switching off
1 Press the on/off switch again.
All the left-hand cooking zones switch off.
The residual-heat indicator will continue to indicate that
the zone is hot if it still is.
2 You switch one of the four left-hand cooking zones off by
setting it to 0 using the + and – buttons.
3 Press the double cooking zone’s on/off button again.
The double cooking zone switches off.
The residual-heat indicator will continue to indicate that
the zone is hot if it still is.
lower higher
on/off button
Use the correct pan.
See the "pans"
section on pages 21
and 22.
GB 6
safety
what you should pay attention to
Do not use aluminium foil, such as the trays from ready-made
meals, for cooking food in.
If aluminium foil melts on the cooking surface, it cannot be
removed.
Grains of sand may cause scratches which cannot be
removed.
• Only put pans with a clean base on the cooking surface.
• Always pick pans up to move them.
• Do not use the hob as a worktop.
Always pick pans up;
never slide them.
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
6
10
12
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HI511M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HI511M in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info