336586
70
Zoom out
Zoom in
Previous page
1/78
Next page
GB 32
GeneralTROUBLESHOOTING
SYMPTOM
POSSIBLE CAUSE SOLUTION
e hob is not working and
nothing appears in the display.
ere is no power supply due
to a defective cable or a faulty
connection.
Check the fuses or the electric
switch (if there is no plug).
A fuse blows as soon as the hob
is switched on.
e hob has been wrongly
connected.
Check the electrical
connections.
Fault code F00 / Red indicator
light next to button
is
burning and the indicator light
above button
is blinking.
e control panel is dirty or has
water lying on it.
Clean the control panel.
Fault code F0 ... F6 and FC. Defective generator. Contact the service department.
Fault code F7. e ambient temperature is not
good.
Switch o all heat sources in the
vicinity of the cooking plate.
Fault code F8 and F08 /
Red indicator light next to
button
is burning and the
indicator light above button
is blinking.
Appliance over heated. e appliance has been
switched o because of over
heating. Let the appliance cool
down and start again on a lower
setting.
Fault code F9 and/or
continuous beep.
e appliance has been
connected incorrectly and/or
the mains voltage is too high.
Let your connection be
changed.
Fault code F99 / Red indicator
light next to button
is
burning and the indicator light
above button
is blinking.
You have pressed two or more
buttons at the same time.
Do not operate more than one
button at the same time.
Fault code FA. Mains voltage is too low. Contact your energy supplier.
Fault code FAN. Air circulation not good. Make sure the venting holes
under the cooking plate are open.
Other fault codes. Defective generator. Contact the service department.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG hi 7271 s at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG hi 7271 s in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG hi 7271 s

ATAG hi 7271 s Installation Guide - English, German - 2 pages

ATAG hi 7271 s User Manual - German - 61 pages

ATAG hi 7271 s Installation Guide - Dutch, Danish, French - 2 pages

ATAG hi 7271 s User Manual - French - 61 pages

ATAG hi 7271 s Installation Guide - Swedish, Norwegian - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info