50241
46
Zoom out
Zoom in
Previous page
1/58
Next page
91
CONTROLS
igniting and adjusting
Each burner can be adjusted continuously between the full and low
positions.
Wok HG96..MX/MT, HG97..MX/MT
controls
Press the control knob in and turn it anti-clockwise.
The burner ignites.
In the case of appliances with flame failure device you must hold the
control knob pressed in for approximately 5 seconds to switch the flame
failure device on.
0-setting
burner indication
high setting
low setting
0-setting
burner indication
high setting wok
low setting outer ring wok
low setting wok
90
SAFETY
what you should pay attention to
Ensure that there is adequate ventilation during use
Keep natural ventilation openings open.
When using the hob for long periods, extra ventilation is necessary.
Open a window for instance or install a mechanical fan.
Use the hob only for preparing dishes
The appliance is not suitable for space heating.
Never flambé under an extractor hood
The high flames can cause a fire, even if the fan is switched off.
The burner parts are hot during and immediately after use
Do not touch them, and avoid contact with non-heat-resistant
materials.
Never immerse hot burner parts in cold water. The rapid cooling can
damage the enamel.
The distance from the pan to a knob or non-heat-resistant wall
should always be greater than two centimetres
In the case of smaller distances the high temperature may cause the
knobs or wall to discolour and/or distort.
Always use the pan supports and suitable cooking utensils
Always place the pan on the pan support. Placing the pan directly on
the burner head can result in dangerous situations.
Aluminium trays or foil are not suitable as cooking utensils. They can
become burnt into the burners and pan supports.
Installing burner parts and pan supports
The hob can only function effectively if the burner parts have been
assembled using the guide ridges.
Ensure that the pan supports lie properly against each other and flat
on the glass plate. Only then can the pans be positioned stably.
700001740000_hl_HG_4t:opm 23-10-2007 9:59 Page 90
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG77 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info