675702
73
Zoom out
Zoom in
Previous page
1/94
Next page
Adjusting for a different gas type
Instellen voor andere gassoort
Umstellung auf eine andere Gasart
Regolazione per un tipo diverso di gas
Installation d’une autre type de gaz
Indstilling til en anden type gas
Tilpasning for en annen gasstype
Justering för en annan gastyp
Säätö eri kaasutyypille
Настройка на другой тип газа
Басқа газ түріне арналған баптау
Conversion instructions
Ombouwvoorschrift
Umbauvorschrift
Istruzioni di conversione
Consigne de conversion
Ombygningsanvisning
Instruksjoner for konvertering
Konverteringsinstruktioner
Muunto-ohjeet
Руководство по переоборудованию
Өзгерту нұсқаулары
EN ..............................................................................................................................................3
NL ............................................................................................................................................12
DE ............................................................................................................................................20
IT .............................................................................................................................................28
FR ............................................................................................................................................37
DA ............................................................................................................................................45
NO............................................................................................................................................53
SV ............................................................................................................................................61
FI..............................................................................................................................................69
RU ............................................................................................................................................77
KK ...........................................................................................................................................85
3
Attention:
This instructions should be executed by an Authorised person.
When a non-qualifi ed engineer executes these instructions it can lead to hazardous situations.
The supplier is not responsible for the consequences (the arising of a hazardous situation and/or damage to per-
sons or goods) caused by incorrect performance of these instructions by engineers who are not employees of the
the supplier. Consequential damage arising through inexpert performance of these instructions is not accepted.
This conversion-set consists of original parts. Original parts are tested for suitability and safety during the type-
approval of the appliance. Frequently performed batch-approvals guarantee the quality of original parts.
The supplier recommends, when converting an appliance to another gas type, to have this performed by an
engineer of the service department. Phone the supplier to make an appointment with the service engineer. For
addresses see the garantee regulations from the appliance.
4
G
B
B
A
C
g b b a c
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
Introduction
With this conversion-set you can convert your gas hob from natural gas
(G20/ G25) to propane/butane gas. Before you start conversion, check
whether your gas hob is genuinely set to natural gas.
Tools
A. Tube- (or socket spanner 7)
B. Screwdriver 4 mm (blade width)
C. Torx 20 screwdriver
D. Pointed pliers
E. Leak spray and/or special pressure gauge
F. 7+10 open-end spanner (wok)
G. Wok insulation plate
Attention: Check the gas tightness after converting the appliance
(see chapter 3).
Replace the following parts:
- injector for the burners
- simmer setting screws for the gas taps
- sealing rings for the sealing under the burners
- screws for fastening the burner head/drip tray on the burner
- 3 data labels with the modifi ed gas setting
- 3 fi bre rings underneath the wok burner screws
- Wok burner head (for G110 and G120 only)
- Roast burner head (for G110 and G120 only)
- Replace appliance regulator with test point adaptor
(only for AU and NZ)
For verifi cation, you can fi nd the values of the injector fi gures and simmer
setting screws on the stickers of the sets. The characters of the sets (upper
case characters for injectors and lower case characters for simmer setting
screws) correspond with the characters on the sticker on the base of the
lower tray of the appliance. The values are also indicated on the injectors
and simmer setting screws.
The following sets are possible:
- Set ‘A-a’ for simmer burner
- Set ‘B-b’ for normal burner
- Set ‘C-c’ for semi rapid burner
- ‘G1-g’,’G2’ and ‘G3’ sets for wok burner (‘g’ for simmer setting screw)
Example sticker lower tray
Examples stickers sets
Set ‘A-a’ for simmer burner
Set ‘G1-g’ for wok burner
A
B
C
D
F
EG
5
1
Dismantling (see illustration A)
Please note: disconnect the appliance before you remove the drip tray.
Prevent damage of the work top. Lay down parts of the appliance on a
protected base.
1. Remove the pan supports and the burner heads. Pull up the control
knobs vertically and remove them.
2. Remove the wok burner cup and the wok heads by removing the wok
distributor from the appliance (refer to the manual to do this).
3. Unscrew the burner cups (see illustration A1). For this purpose use a
Torx-20 (!).
4. Lift the burner cups vertically upward
Attention: remember the position of the burner cups. The sticker
in the base layer also indicates the position of the burner cups. A is the
simmer burner, B the normal burner, C the semi rapid burner and E
the wok burner.
For the domino wok, fi rst remove the appliance from the recess and
then remove 3 screws on the left-hand and right-hand sides (see
illustration A6).
5. Carefully open the drip tray at the front and slide away the pin of the
grounding clip from the drip tray (see illustration A2).
6. Remove the drip tray/glass plate.
7. Attention! Remember the position of the spark plug holders.
Replace the spark plug holder in the same position during assembly.
When necessary, mark the position of the spark plug holders (see
illustrations A3 and A4).
A1
A4
A2
A3
A5
A6
6
2
Converting (see illustration B)
The position, the burner type (upper case character) and the tap (lower case character) are schematically indicated
on the sticker in the bottom layer. There are small bags with the corresponding characters in the conversion set
(see “Introduction”).
1. Replace the injectors in the burners. Use a tubular spanner 7 for disassembling/assembling the injector
(see illustrations B1, B2 en B3).
2. Replace the simmer setting screws in the taps. The position of the simmer setting screw can vary per type of
gas tap (see illustration B4). Use a screwdriver, blade width 4 mm, for disassembling/assembling of the simmer
setting screw (see illustration B5/B6) and when necessary use pliers.
3. On the wok burner, replace the injectors for simmer (G1), wok (G2) and roast (G3). The wok injector is
indicated by one rib on the injector holder, the roast injector by two ribs. The simmer injector is the one in the
middle (see illustrations B7 and B8). You can replace the simmer injector with a no. 7 open-end spanner and
a 3.6 Nm tightening moment. Use a no. 10 open-end spanner with a 5 Nm tightening moment to replace the
roast and wok injectors.
For verifi cation, you can fi nd the values of the injectors and simmer setting screws on the data label of this
se
t! For verifi cation also view the values table, injector and simmer setting screws.
4. Place the sticker ‘H1’ in the appropriate block on the current appliance identifi cation card (with the type of
gas/gas pressure) in the bottom tray (see illustrations B9, B10 and B11).
5. Place the sticker ‘H2’ in the appropriate block on the current appliance identifi cation card (with the type of
gas/gas pressure) on the underside of the bottom tray (see illustrations B9, B12 and B13).
6. Place the sticker ‘G2’ in the appropriate block on the current appliance identifi cation card (with the type of
gas/gas pressure) on the back of the user manual (see illustrations B9, B14 and B15).
Warning!
Check the appliance for gas tightness, especially the injectors and simmer setting screws!
Always check for gas tightness before using the appliance! Check the other injectors fi rst before checking
the roast injectors.
Please note: to do this, connect the appliance to the mains.
Do not forget to use the insulation plate!
B1
B2
B3
7
B5
G2
G30 30 mbar
H1
G30 30 mbar
H2
G30 30 mbar
G
B
B
A
C
g b b a c
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
G
B
B
A
C
g b b a c
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
H1
G30 30 mbar
B4
B9
B11
B12
B13
B14
B15
B10
B6
B7
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
H2
G30 30 mbar
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
G2
G30 30 mbar
B8
G3
G2
G1
This labels are examples and could
different for other kind of gases.
8
3
Check for gas tightness (see illustration C)
Use leak spray to check the gas tightness when the appliance is connected to the gas supply:
1. Seal the injector.
2. Open the gas tap. Attention; press and open taps with thermo electric safety device and keep them pressed!
3. Spray leak spray on the connections and check them for gas tightness (see illustrations C1 and C2).
4. When checking the gas density of the wok or roast injectors, the simmer injector must also be closed off. When
checking the roast injector (wok), connect the appliance to the mains to be able to turn on the solenoid. Position the
insulation plate to shield any live parts (switch) (C4).
When checking gas density, always leave the roast injector until last. Always use the sealing ring and the control knob.
Refer to the manual. Be careful of any live parts.
Check the gas tightness with a pressure pump (see illustration C3) when the appliance is not connected to the gas supply:
1. Connect the pressure pump to the gas pipe (see illustration C4) and close all gas taps.
2. Increase the pressure to 150 mbar and close the tap (see illustration C3/10) between the pressure pump and the
pressure gauge (see illustration C3/8). Check the pressure. The maximum pressure loss may amount to 5 mbar per
minute. After checking, open the tap (see illustration C3/10) between the pressure pump and the pressure gauge.
3. Open one of the taps and close the corresponding injector (see illustration C5/11).
Attention; press and open taps with thermo electric safety device and keep them pressed!
4. Increase the pressure to 150 mbar and again close the tap between the pressure pump and the pressure gauge.
Check the pressure. The maximum pressure loss may amount to 5 mbar per minute.
5. Repeat this test for all taps and injectors.
You may use an other approved method for checking the gas tightness.
Final assembly (see illustrations D)
1. Check the position of the spark plug holders. Incorrectly positioned spark plugs can result in incomplete combustion.
2. Place the drip tray on the appliance. Do not forget to connect the earth cable to the drip tray (see illustration D1)!
3. Place new seal rings in the burner cups (see illustration D2). Screw the burner cups onto the burners with new
torx-screws.
4. Position new fi bre rings underneath the wok burner screws.
Start up
1. Put the knobs, the wok burner cup, the burner heads and the pan supports in position. For G110 and G120,
replace the wok burner head and roast burner head with the burner heads included in the conversion set.
2. Check whether the appliance is connected to the correct type of gas and gas pressure.
3. Open the gas supply and insert the plug into the power socket.
C1
C2
C4
7
8
9
10
C3
9
Checking operation (see images E/F)
Ignite the burners. Check whether the fl ame profi le is uniform and stable for the complete fl exibility ratio
(see illustrations E1, E2 en E3).
Important for this is that:
- The ame does not smother in simmer rate, the burner does not ‘blow off’ at maximum burning (to be
recognized in fl ames that are at a distance from the burner in combination with a ‘hissing’ sound) and
there are no long yellow fl ames.
- The burners are positioned correctly (see images F1/F2).
E1 Error/blow off
E2 Error/long yellow fl ames
F1 Incorrectly positioned
F2 Correctly positioned
E3 Correct/steady fl ame image
D2D1
11
C5
C4
73
B5
G2
G30 30 mbar
H1
G30 30 mbar
H2
G30 30 mbar
G
B
B
A
C
g b b a c
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
G
B
B
A
C
g b b a c
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
H1
G30 30 mbar
B4
B9
B11
B12
B13
B14
B15
B10
B6
B7
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
H2
G30 30 mbar
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
G2
G30 30 mbar
B8
G3
G2
G1
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG1472MDB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG1472MDB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HG1472MDB

ATAG HG1472MDB Installation Guide - English - 2 pages

ATAG HG1472MDB User Manual - English - 36 pages

ATAG HG1472MDB Installation Guide - German - 2 pages

ATAG HG1472MDB User Manual - German - 36 pages

ATAG HG1472MDB Installation Guide - Dutch - 2 pages

ATAG HG1472MDB User Manual - Dutch - 36 pages

ATAG HG1472MDB Installation Guide - French - 2 pages

ATAG HG1472MDB User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info