556875
5
Zoom out
Zoom in
Previous page
1/94
Next page
5
1
Dismantling (see illustration A)
Please note: disconnect the appliance before you remove the drip tray.
Prevent damage of the work top. Lay down parts of the appliance on a
protected base.
1. Remove the pan supports and the burner heads. Pull up the control
knobs vertically and remove them.
2. Remove the wok burner cup and the wok heads by removing the wok
distributor from the appliance (refer to the manual to do this).
3. Unscrew the burner cups (see illustration A1). For this purpose use a
Torx-20 (!).
4. Lift the burner cups vertically upward
Attention: remember the position of the burner cups. The sticker
in the base layer also indicates the position of the burner cups. A is the
simmer burner, B the normal burner, C the semi rapid burner and E
the wok burner.
For the domino wok, fi rst remove the appliance from the recess and
then remove 3 screws on the left-hand and right-hand sides (see
illustration A6).
5. Carefully open the drip tray at the front and slide away the pin of the
grounding clip from the drip tray (see illustration A2).
6. Remove the drip tray/glass plate.
7. Attention! Remember the position of the spark plug holders.
Replace the spark plug holder in the same position during assembly.
When necessary, mark the position of the spark plug holders (see
illustrations A3 and A4).
A1
A4
A2
A3
A5
A6
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG1471MDB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG1471MDB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HG1471MDB

ATAG HG1471MDB Installation Guide - English - 2 pages

ATAG HG1471MDB User Manual - English - 74 pages

ATAG HG1471MDB Installation Guide - German - 2 pages

ATAG HG1471MDB User Manual - German - 74 pages

ATAG HG1471MDB Installation Guide - Dutch - 2 pages

ATAG HG1471MDB User Manual - Dutch, Danish - 74 pages

ATAG HG1471MDB Installation Guide - French - 2 pages

ATAG HG1471MDB User Manual - French, Swedish, Spanish, Norwegian, Finnish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info