556874
4
Zoom out
Zoom in
Previous page
1/94
Next page
4
G
B
B
A
C
g b b a c
ADJUSTED FOR
INGESTELD VOOR
G25 / 25 MBAR
ITEM NO. HG9571MBA1E/A1
Brand logo
SERIAL NO. 1D4235A2
TYPE HG3BAE1A
Introduction
With this conversion-set you can convert your gas hob from natural gas
(G20/ G25) to propane/butane gas. Before you start conversion, check
whether your gas hob is genuinely set to natural gas.
Tools
A. Tube- (or socket spanner 7)
B. Screwdriver 4 mm (blade width)
C. Torx 20 screwdriver
D. Pointed pliers
E. Leak spray and/or special pressure gauge
F. 7+10 open-end spanner (wok)
G. Wok insulation plate
Attention: Check the gas tightness after converting the appliance
(see chapter 3).
Replace the following parts:
- injector for the burners
- simmer setting screws for the gas taps
- sealing rings for the sealing under the burners
- screws for fastening the burner head/drip tray on the burner
- 3 data labels with the modifi ed gas setting
- 3 fi bre rings underneath the wok burner screws
- Wok burner head (for G110 and G120 only)
- Roast burner head (for G110 and G120 only)
- Replace appliance regulator with test point adaptor
(only for AU and NZ)
For verifi cation, you can fi nd the values of the injector fi gures and simmer
setting screws on the stickers of the sets. The characters of the sets (upper
case characters for injectors and lower case characters for simmer setting
screws) correspond with the characters on the sticker on the base of the
lower tray of the appliance. The values are also indicated on the injectors
and simmer setting screws.
The following sets are possible:
- Set ‘A-a’ for simmer burner
- Set ‘B-b’ for normal burner
- Set ‘C-c’ for semi rapid burner
- ‘G1-g’,’G2’ and ‘G3’ sets for wok burner (‘g’ for simmer setting screw)
Example sticker lower tray
Examples stickers sets
Set ‘A-a’ for simmer burner
Set ‘G1-g’ for wok burner
A
B
C
D
F
EG
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HG1471MDA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HG1471MDA in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HG1471MDA

ATAG HG1471MDA Installation Guide - English - 2 pages

ATAG HG1471MDA User Manual - English - 74 pages

ATAG HG1471MDA Installation Guide - German - 2 pages

ATAG HG1471MDA User Manual - German - 74 pages

ATAG HG1471MDA Installation Guide - Dutch - 2 pages

ATAG HG1471MDA User Manual - Dutch, Danish - 74 pages

ATAG HG1471MDA Installation Guide - French - 2 pages

ATAG HG1471MDA User Manual - French, Swedish, Spanish, Norwegian, Finnish - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info