336566
52
Zoom out
Zoom in
Previous page
1/58
Next page
103
INSTALLATION INSTRUCTIONS building in
cut opening in worktop
Saw the opening in the worktop. This should be done very accurately
(building in dimensions).
If the woodtop is made of treated wood, then coat the sawn surfaces of
the top with sealing varnish, to prevent moisture causing the top to swell.
attachment points for mounting brackets
thin worktops
thick worktops
threaded hole /
screw / worktop
102
preparing the hob
Fit the elbow supplied on the appliance's gas connection.
Remove the protective foil of the sealing strip (A) and attach the sealing
strip in the groove of the aluminium profiles or the edge of the glass
plate. Do not attach the sealing strip through the corner. Instead, cut
4 pieces that fit tightly together in the corners.
1/2" ISO 228
(straight)
1/2" ISO 7/1
(conical)
sealing ring
1/2" ISO 228
(straight)
1/2" ISO 228
(straight)
sealing ring
INSTALLATION INSTRUCTIONS building in
A
only for France
Attention!
This only applies to the glass appliance.
In stainless steel appliances HG77..M
and HG97..M the sealing tape has
already been applied.
700001740000_hl_HG_4t:opm 23-10-2007 9:59 Page 102
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG hg 7611 mba at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG hg 7611 mba in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 7,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info