335898

ATAG hg 6192 p Manual

37
Zoom out
Zoom in
Previous page
1/42
Next page
GB 10
GB 11
MAINTENANCEMAINTENANCE
General
Regular cleaning immediately after use prevents over-cooked food U
being able to become ingrained and cause stubborn stains that are
difficult to remove. Use a mild cleaning agent.
Clean the control knobs, burners and pan supports first and then U
the stainless steel drip tray. is avoids the stainless steel drip tray
getting dirty again during cleaning.
Stubborn stains on enamel (pan supports, burner caps)
Remove with a non-abrasive cream or a soft sponge. Never use U
scouring powder, scouring pads, sharp objects or aggressive
cleansing agents.
Stubborn stains on stainless steel (drip trays)
If spilled, acid fluids and sugary foodstuffs like red cabbage, U
beetroot, soy sauce, applesauce and rhubarb may cause the surface
to discolour. Stubborn stains on stainless steel are best removed
with a special cleaning agent. Always polish in the direction of the
steel structure to avoid shine spots. (is kind of damage is not
covered by the warranty!)
If the above methods do not remove the stains, clean the plate U
with ATAG Shine. Remember to treat the entire drip tray in order
to avoid discolouring. Also, as a follow-up treat the drip tray with
a polish or maintenance agent for stainless steel. Please note that
over the years the surface will slightly discolour.
Cleaning removable burner components
e removable burner components (including wok) are best U
cleaned with a mild cleaning product and a soft cloth. In the case
of obstinate stains you can soak the parts in hot suds.
Never use scouring powder, scouring pads, sharp objects or U
aggressive cleansing agents.
Your appliance has been manufactured from high-grade materials,
which are easy for you to clean.
Burner parts should not be cleaned in the dishwasher. e parts U
may be damaged by the dishwasher detergent! Do not use too
much water as this can penetrate into the burner or ventilation
openings.
Clean the spark plugs preferably with a cloth. Do this carefully. U
If too much pressure is applied, the distance from the point of the
sparkplug to the burner may change, causing the burner to ignite
poorly or not at all. e sparkplug will only operate correctly in a
dry environment. If the plug is very dirty, you may clean the point
with a tiny brush.
Set the pan supports down vertically, without sliding them over U
the stainless steel drip tray.
Assemble the burner parts using the guide ridges. U
General General
1
2
3
4
5
6
7
1
2
3
4
1. Burner head
2. Burner base
3. Sparkplug
4. ermocouple
1. Burner cap outer ring
2. External torch head
3. Internal lid and torch head
4. Gas base
5. Burner base
6. Sparkplug
7. ermocouple
Simmer-, semi-rapid Wok burner
and rapid burner
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG hg 6192 p at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG hg 6192 p in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info