692538
32
Zoom out
Zoom in
Previous page
1/76
Next page
EN 14
How to link Bridge cooking zones
Start the ‘link’ function
1. Press the On/Off key.
2. Simultaneously touch the left-hand side cooking zone keys.
The ‘bridged indicator’ will appear on the rear zone display to indicate that the two
cooking zones are bridged.
3. Set the desired cooking power for the bridged cooking zone.
4. To change the bridged zones cooking power later on, first press the sensor of the front
cooking zone.
Stop the ‘link’ function
1. Simultaneously touch the left-hand side cooking zone keys.
The ‘bridged indicator’ will disappear on the rear left zone display.
Using the (child) lock function
1. Switch off the hob.
2. Press the on/off key for approximately 3 seconds.
All displays show ‘L’.
The ceramic hob is now locked. After 5 seconds, the hob will switch off automatically.
To unlock press the on/off key again for approx. 3 second.
Child lock is now de-activated.
OPERATION
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG HC6471G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG HC6471G in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG HC6471G

ATAG HC6471G Installation Guide - English, German, Dutch, French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info