GB6
important mattersSAFETY
Overheating protection
In the event of a problem, the power supply is immediately cut off. The
power supply is not automatically resumed. Contact the service
department to have the safety component repaired.
Safety instructions
This appliance has been designed for household use exclusively. In order
to avoid any damage, it is important that you follow the instructions in
the user manual. If this appliance is used for any other purpose, the
guarantee will expire. Following is an overview of a number of important
safety instructions. Read them carefully.
- Service and maintenance may only be carried out by an ATAG
authorized service organization.
- Only parts may be used that have been supplied by ATAG. Read the
guarantee.
- Make sure that the cable does not jam.
- Never leave the appliance unattended when in use.
- In the event of the oil or fat catching fire, place the lid on the
appliance to extinguish the flame.
- Switch off the appliance if the oil or fat catches fire. Also switch off the
extractor hood. If you cannot do so with the switch on the appliance,
switch off the fuse in the meter cabinet instead.
- Check if you have switched off the appliance if you have finished
using it. The button should indicate zero.
- Never put paper or any other combustible items on the appliance.
- Make sure that there is no open fire close by. The oil is hot and
highly combustible.
- Always keep the deep-frying pan clean. This is important for both
hygienic and safety reasons.
- When heating the appliance, spilled food and fat will cause smoke
and could even cause a fire.
- Read the guidelines in this manual and follow them.
- The power circuit should be fitted with a bipolar switch with a contact
distance of at least 3 mm.
