71116

ATAG FG 1093 L Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
15
For the userGB
hose must be replaced at the latest at the indicated date and
must be secured at both ends using a standard hose clamp.
- If taps become stiff to operate over time, contact the After-
Sales service.
- Wash enamelled or chrome-plated parts with soapy lukewarm
water or non-abrasive detergents. A metal brush may be used
to remove deposits from hob burners and flame caps. Dry thor-
oughly.
- Never use abrasives to clean enamelled or chrome-plated
parts.
- Do not use too much water when washing the hob. Take care
that no water or other substances enter the burner housing
holes, as this may be dangerous.
- The spark plugs for electric ignition must be kept clean and
dry; always check after use, particularly if there have been
drips or overflows from pans.
- Never knock enamelled parts or ignition spark plugs (where
present).
- The main or wall gas tap should be turned off when the cooker
is not in use.
- Never lift the cooker by taking hold of the oven door
handle.
- Any overheating of the outside walls of the oven will trip the
safety device, which will cut off the power supply. The power
supply will be restored automatically once the outside tem-
perature of the oven has dropped back within acceptable lim-
its. However, remember that if this device is tripped repeat-
edly, there is a malfunction (e.g. breakage of the thermostat
which regulates the temperature inside the oven). Call in your
service engineer.
- When the oven and grill are switched on for the first time there
may be a typical smell and smoke may come out of the oven.
This is because of the treatment applied to the surfaces. Op-
erate the oven empty before placing foods inside.
No liability is accepted for injury or damage caused by poor
installation or improper use of the cooker.
- Some modeles are fitted an automatic cooling motor.
In case of malfunctions, particularly gas leaks or short-cir-
cuits, contact your engineer without delay.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG FG 1093 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG FG 1093 L in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info