Manual ATAG ES9111EM (page 54 of 82) (English, German, Dutch, Danish, French)

557031

Zoom out

Zoom in

1/82

GB 6

Precautions you must take

• When replacing the lights, first disconnect the appliance from the

mains! Only use identical lamps with the wattage indicated. Only

use the cooker hood with lamps installed, in order to reduce the risk

of electric shock.

• Accessible parts may become hot when used with cooking

appliances.

• The grease filters become hot during operation. Wait a minimum of

30 minutes after cooking before cleaning the filters.

• The power must be switched off during repairs or cleaning. Remove

the plug from the mains socket or turn the switch in the meter

cupboard to zero.

• Grease and oil are flammable when they are overheated. Stay in the

vicinity of the cooker when preparing food.

• We will not accept any responsibility for any faults, damage to the

appliance, or fires resulting from non-observance of the instructions

included in this manual.

Extraction systems

Depending on the type, the cooker hoods can

be connected in one of two ways:

1. To a duct. The cooking vapours extracted

by suction are carried outside, once the

grease particles have been filtered. This is

the best method.

2. Recirculation hood. When the hood is

connected as a recirculation hood, the

grease particles and odour in the extracted

vapours are filtered.

The extracted air is not carried outside but

recirculates in the kitchen. In this case you

must have a carbon filter fitted.

Attention! The carbon filter needs to be

ordered separately.

SAFETY

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES9111EM in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 7,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG ES9111EM Manual

Product: