772257
30
Zoom out
Zoom in
Previous page
1/36
Next page
EN 6
USE
Switching on the timer
Switch on the extractor cap with button ‘A’.
Set the extraction strength with buttons ‘B’ and ‘C’.
Press the Timer button ‘F’.
The extractor cap switches off automatically after 30 minutes.
Switch off the Timer function by pressing button ‘F’ again, or by
switching off the extractor cap with button ‘A’. The display shows
the selected speed and the remaining time.
Activating the alarm signal
In recirculation version hoods, the filter saturation alarm must be
activated on installation or at a later date.
Turn the lights and the motor off.
Press ‘D’ and hold for approximately 5 Seconds:
- The display shows ‘FC’ and the indication on the bottom right flashes
twice. The filter saturation alarm is ACTIVATED
- The display shows ‘FC’ and the indication on the bottom right flashes
once. The filter saturation alarm is DEACTIVATED
Grease filter indicator
After 100 hours of use the “F6” indicator is shown in the display.
Clean the grease filters.
Odor/fine dust filter indicator
After 200 hours of use the “FC” indicator is shown in the display.
Replace your combination of odor/fine dust filter at least every year, or
sooner if the efficiency is greatly reduced.
Reset the filter indicator alarm
Turn the Lights and the motor off.
Press button ‘E’ for 3 seconds.
I
I
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ES90211EM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES90211EM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG ES90211EM

ATAG ES90211EM Installation Guide - All languages - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info