Manual ATAG ES1211ZAM (page 92 of 104) (English, German, Dutch, French)

481524

Zoom out

Zoom in

1/104

GB 16

MAINTENANCE

Active carbon filters:

The active carbon filters are used to purify the air that is sent back

into the room and its function is to mitigate the unpleasant odours

produced by cooking. Regenerable active charcoal filters must

be washed by hand, with non abrasive neutral detergents, or in

the dishwasher at a maximum temperature of 65 °C (the washing

cycle must be complete without dishware). Remove excess water

without damaging the filter, remove the stainless steel casing, and

let the mat dry in the oven for at least 15 minutes approximately at a

maximum temperature of 100 °C. To keep the regenerable charcoal

filter functioning efficient this operation must be repeated when the

indicator starts flashing. The charcoal mat must be replaced at least

every 3 years or when the mat is damaged. Before remounting the

anti-grease filters and the regenerable active charcoal filters it is

important that they are completely dry. To transform the hood from a

ducting version into a filtering version, ask your dealer for the charcoal

filters and follow the installation instructions.

Substitution of active carbon filters:

To replace the active carbon filters you must remove the antigrease

filters and then, press the two buttons on the side B of the active

carbon filter into the interior. To remove the filter pull it down. To

reassemble the part, simply perform the procedure in reverse.

To replace a halogen bulb B, press the glass cover C as shown in figure 1

Attention:

Replace the halogen bulb with one of the exact same type. Do not

touch a halogen bulb with bare hands, and make sure you put the glass

cover C (figure 2) back in place after replacing the bulb.

Attention!

If instead the hood is fitted with LED bulbs, these have to be replaced

by a specialized technician. Do not attempt to replace LED bulbs

yourself.

Fig.1

Fig.2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES1211ZAM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG ES1211ZAM Manual

Product: