481524
81
Zoom out
Zoom in
Previous page
1/104
Next page
GB 5
Attention!
Make sure the appliance is installed by an authorised installer (see
“Installation” chapter). Do not connect the appliance to the flow
network before completing the installation.
Connect the appliance in accordance with the applicable
regulations in your area.
We advise you to wear protective work gloves during the installation
of the cooker hood due to possible sharp edges.
The appliance has been manufactured in accordance with the
latest safety standards. However we do advise that mentally
handicapped, disabled or retarded individuals do not use this
appliance without the proper supervision of a competent person.
The same applies to children.
Never use the cooker hood when the grease filter has not been
properly installed!
Do not lean against the cooker hood.
The hood must never be used as a support surface unless
specifically indicated.
Make sure there is sufficient circulation when you use the cooker
hood on a gas hub.
The exhaust exit must never be connected to a smoke duct which
is also used for other heating appliances.
Never flambé under the cooker hood and always clean the filters on
time. Frying needs to be done under constant supervision to
prevent the heated fat from catching fire.
The cooker hood needs to be cleaned regularly (at least once a
month) on the inside as well as on the outside. When the filters are
insufficiently cleaned or replaced, this will result in a fire hazard.
If the connection cable becomes damaged, it should be replaced
by the manufacturer’s service department or by a person with
equivalent qualifications, in order to prevent dangerous situations
from arising.
Accessible parts may become hot when used with cooking appliances.
First disconnect the appliance from the socket when you replace
the lights!
Only use identical lamps with the wattage indicated. Only use the
cooker hood with lamps installed to reduce the risk of electrical
shock.
SAFETY
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ES1211ZAM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES1211ZAM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info