Manual ATAG ES1211MAX (page 89 of 104) (English, German, Dutch, French)

481521

Zoom out

Zoom in

1/104

GB 13

Indicator E

The lights indicator will switch on when the lights are on at any level.

Indicator F

After 30 minutes of operation, the led of the filters indicator will switch

on, not flashing indicating that the anti-grease filters have to be

washed. To reset the function (with the hood off), press the Fan speed

button for 5 seconds. After this operation, the led of the filters indicator

turns off and the setting of the 30 hours starts again from the beginning.

After 120 hours the led will flash continuously. This means that the

carbon filters have to be replaced (if present). To reset the function

(with hood off) press the Fan speed button for 5 seconds. After this

operation, the led of the indicator turns off and the setting starts again

from the beginning.

Indicator G

With the hood off, press the Power button (A) for 5 seconds to activate

the clean air function. This will switch on the motor at speed 1 for 10

minutes every hour. The light indicator will switch on without flashing

and the led of the 1st speed will switch on. In the remaining 50 minutes

the light indicator will flash. The function can be deactivated by

pressing any button except for the lights one.

USE

Controls

A B E C D

Button A

The on / off button switches on and off the whole hood (motor and

lights).

By pressing the button A the motor starts at 1st speed.

Button B

From the OFF position, press once for the 1st speed, twice for the

2nd speed and three times for the 3rd speed. In order to activate the

intensive speed, press the button for 5 seconds regardless of the status

of the hood. For each speed only the led indicating the set speed will

turn on. The intensive speed is indicated by the flashing of the led

indicating speed 3. The duration of the intensive speed is 10 minutes;

after this time the hood goes back to the last set speed. In order to

remove the intensive speed press the power button and the hood will

switch off, or press the Fan speed button and the speed goes back to

the previously set one. Speed of the hood with cyclic trend.

Button C

There are three light levels: high, medium, low.

From the off position press once for the high level, twice for the medium

level, three times for the low level and four times to turn the lights off.

The level of the lights has a cyclic trend: High, medium, low, off.

Button D

With any type of speed (excluding the intensive speed), by pressing the

button, the timer function is activated for 15 minutes. After this time has

elapsed the hood will turn off (motor and any light on).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES1211MAX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG ES1211MAX Manual

Product: