Manual ATAG ES1092SAM (page 81 of 92) (English, German, Dutch, French)

634372

Zoom out

Zoom in

1/92

EN 15

INSTALLATION

It is best that two people install this cooker hood.

2--

(

)

COD. 3D IMAF I

2--

- Unpack the frame and remove the two

screws A to separate the top section from

the bottom section (Fig.1).

- Take the template and

place this against the ceiling with the arrow

on the same side as the hood’s control panel

(Fig.2).

For assembly, screws should be used that

are suitable for the wall type (for example

reinforced concrete, plasterboard, etc.).

If screws and plugs are supplied with the

hood, make sure in advance that these are

suitable for the wall on which the hood is to

be installed.

- Drill four holes Ø 8 in the ceiling and afﬁ x the

four plugs.

- Form the air outlet opening A (Fig.3).

- Connect the tube to the opening A.

- Take the bracket B and secure this to the

ceiling with the four screws C (Fig.4).

Fig.4

Fig.3

Fig.1

Fig.2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES1092SAM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG ES1092SAM Manual

Product: