Manual ATAG ES1011UAM (page 96 of 104) (English, German, Dutch, French)

481516

Zoom out

Zoom in

1/104

GB 20

INSTALLATION

You are advised to install this product with the help of a second person.

2--

(

)

3DIMAF I

2--

- Unpack the structure and remote the two

screws A to separate the top part from the

bottom one (Fig.1).

- Take the hole template and place it on the

ceiling, with the arrow on the same side as the

hood’s controls (Fig.2).

For the mounting work, use screws and

expansion dowels suited to the type of wall

(e.g. reinforced concrete, plasterboard, etc.).

If screws and dowels are provided with the

hood, make sure beforehand that these are

suitable for the type of wall on which the hood

is to be mounted.

- Drill the four Ø 8 holes in the ceiling and insert

the four dowels.

- Prepare the air evacuation hole A (Fig.3).

- Connect the ﬂexible pipe to hole A.

- Take bracket B and fasten it on the ceiling with

the four screws C (Fig.4).

Fig.4

Fig.3

Fig.1

Fig.2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ES1011UAM in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 13,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATAG ES1011UAM Manual

Product: