507741
16
Zoom out
Zoom in
Previous page
1/64
Next page
16
English
e) Valve type, units, cycle definition and installer data settings –
Level Manufacturer & installer
Push and hold for 3 seconds on and and
again push and hold for 3 seconds on and .
Set up valve body.
Please select “25 mm” or simply validate because it is
defined as default parameter.
Push on to go to the next parameter
Set up hardness unit.
You can choose between ppm, °dH (German degree),
°fH (French degree), NA (no hardness setting). Default
value is ppm.
We recommend “ppm”
Push on to go to the next parameter
It is not recommended to change
control valves from downflow to
upflow brining or vice versa in the field.
The valve bodies for downflow and
upflow are unique to the regeneration
type and should not be interchanged.
A mismatch of valve body and
regeneration piston will result in hard
water bypass during service.
Choice of cycle 1 (in our example, backwash)
You can choose between backwash, fill, regenerant drawn
dn, regenerant draw up, fast rinse, softening, end
Push on to go to the next parameter
Choice of cycle 2 (in our example Regenerant draw
down)
You can choose between backwash, regenerant draw
down, regenerant drawn up, fast rinse, softening, end
Push on to go to the next parameter
Push on to go to the next parameter
“VALVE TYPE”
HARDNESS UNITS
“FILL”
“SOFTENING”
SET “25” MM
SET
“PPM”
SET CYCLE 1
SET CYCLE 2
x 2
Atag Descale handl EN FR NE.indd 16 13/06/12 16:12
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG Descale at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG Descale in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG Descale

ATAG Descale User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info