675714
47
Zoom out
Zoom in
Previous page
1/52
Next page
instructions for use
Combi steam oven
CS4611D
CS4692D
CS6611D
CS6692D
EN Manual EN 3 - EN 51
Pictograms used
Important information
Tip
EN 3
YOUR OVEN
Your oven
Introduction 4
Control panel 5
Description 6
Guide rails/Telescopic guide rails 6
Accessories 7
Door 8
Cooling fan 8
Main functions 8
Keys 10
Navigation 11
Initial use
What to do first 13
Operation
Selecting your function 16
Function settings mode 16
Progress mode 18
Finish display 18
Changing settings during the progress 19
Use
Functions table 20
Steam function 25
Steam tables 28
Sous Vide table 30
Culisensor 31
Settings menu 33
Plus menu 34
Cooking information 35
Fast preheat 36
Delayed start 36
Gratin 37
Stage cooking 37
Go to manual cooking 38
Programs and Favourites 38
Egg timer 39
Child lock 39
Warming 40
Defrost 40
Cleaning
Cleaning the appliance 41
Steam clean 41
Cleaning the water tank filter 42
Descaling 42
Removing and cleaning the guide rails 43
Replacing the oven light bulb 44
Removing the oven door 45
Removing the oven door glass 46
Solving problems
General 47
Your oven and the environment
Disposal of the appliance and packaging 49
Cooking test
Food tested in compliance with the EN 60350-1 standard 50
EN 4
Introduction
Congratulations on choosing this Atag steam oven.
This product is designed to offer simple operation and optimum
user-friendliness. The oven has a wide range of settings, enabling you
to select the correct cooking method every time.
This manual shows how you can best use this oven. In addition to
information about operating the oven, you will also find background
information that may be useful when using the appliance.
Please read the separate safety instructions
carefully before using the appliance!
Read this manual before using the appliance and keep it in a safe
place for future use.
Installation instructions are supplied separately.
YOUR OVEN
EN 5
Control panel
12
13 14 15 16 17 18 19
1 10 116 7 8 95432
1. Function knob (in ‘Off’ position)
2. Defrost
3. Programs & Favourites
4. Fast preheat
5. Oven
6. Steam
7. Combi steam
8. Warming
9. Steam clean
10. Display
11. Selection knob
12. On/off key and stop key (cancel)
13. Light key
14. Timer key
15. Navigation key left*
16. Navigation key right*
17. Plus key
18. Water reservoir key
19. Confirm key
* pressing 15+16 activates Child lock
Note:
The keys respond best if you touch them with a large area of your
fingertip. Every time you press a key during use, a short acoustic signal
will sound.
YOUR OVEN
EN 6
YOUR OVEN
Description
1
4
Level 1
Level 2
Level 3
Level 4
Level 5*
3
5
2
1. Control panel
2. Water reservoir cover
3. Oven levels
4. Oven door
5. Door handle
Guide rails/Telescopic guide rails
The oven has four or five guide rails (Level 1 to 4/5), depending on
the model. Level 1 is mainly used in combination with bottom heat.
The two upper levels are mainly used for the grill function.
Place the oven rack, baking tray or steam dish in the gap between
the guide rail sliders.
A number of shelf levels can have fully-retractable telescopic guide
rails, depending on the model.
Pull the telescopic guide rails out of the oven cavity completely
and place the oven rack / baking tray / steam dish on them.
Then slide the oven rack / baking tray / steam dish on the
telescopic guide rails, back into the oven cavity.
Only close the oven door when the telescopic guide rails have
been returned completely back into the oven cavity.
EN 7
Accessories
Your appliance is accompanied by a range of accessories, depending
on the model. Only use original accessories; they are specially suited
to your appliance. Be sure that all the accessories that are being used
are able to withstand the temperature settings of the chosen oven
function.
Note: not all accessories are suitable/available for every appliance
(it may also differ by country). When purchasing, always provide the
exact identification number of your appliance. Please see the sales
brochures or check online for more details about optional accessories.
Accessories that can be supplied with your appliance (depending on the model)
Enamelled baking tray; to be used for pastries and cakes.
Do not use the enamelled baking tray for microwave functions!
Suitable for pyrolysis cleaning.
Oven rack; mainly used for grilling. A steam dish or pan with food
can also be placed on the oven rack.
The oven rack is equipped with a safety peg. Lift the rack slightly
at the front to slide it out of the oven.
Do not use the oven rack for microwave functions!
Deep enamelled baking tray; to be used for roasting meat and
baking moist pastry. It can also be used as a drip tray. Place
the deep baking tray into the first level for use as a drip tray
during grilling.
Do not use the deep enamelled baking tray for microwave
functions!
Suitable for pyrolysis cleaning.
Glass baking tray; for microwave and oven use.
NOT suitable for pyrolysis cleaning.
Non-perforated steam dish; 40 mm deep (useful for collecting
moisture during steaming).
Note: discolouration may occur at temperatures above 180 °C!
This will not influence the proper function of the oven.
Perforated steam dish; 40 mm deep (useful for steam settings).
Note: discolouration may occur at temperatures above 180 °C!
This will not influence the proper function of the oven.
YOUR OVEN
EN 8
YOUR OVEN
Accessories that can be supplied with your appliance (depending on the model)
Perforated steam dish; 1/3GN.
Perforated steam dish; 1/2GN.
Note: discolouration may occur at temperatures above 180 °C!
This will not influence the proper function of the oven.
The steam dishes can be used simultaneously on two levels
(i.e., the non-perforated steam dish on Level 1 and the perforated
steam dish on Level 2).
For steaming you can place the perforated steam dish in the non-
perforated steam dish. They can only be used together on a level
with telescopic guide rails.
Culisensor; can be used to measure the core temperature of the
dish. When the desired temperature is reached, the cooking process
will be stopped automatically.
Door
The door switches interrupt the operation of the steam oven when
the door is opened during use. The oven continues operating when
the door is closed.
This oven has a ‘Soft close door system’. When closing the oven
door, this system dampens the movement, from a certain angle, and
silently closes the oven door.
Cooling fan
The appliance is equipped with a cooling fan that cools the casing and
control panel.
Main functions
With the function knob you can select the main functions of your oven.
Setting Description
Off/standby mode
EN 9
Oven
Hot air
Hot air + bottom heat
Bottom + top heat
Large grill
Grill
Large grill + fan
Upper heat
Bottom heat
Bottom heat + fan
Pro roasting
Eco hot air
Fast preheat
Programs and favourites
Favourites
Programs
Defrost
Manual defrost
Steam
Steam
Low temperature
Sous vide
Combi steam
Hot air + steam density 1
Hot air + steam density 2
Hot air + steam density 3
Warming
Regenerate
Plate warming
Keep warm
Steam clean
YOUR OVEN
EN 10
YOUR OVEN
Keys
In the table below you can find the discription of the different keys.
Keys Description of the keys
On/off key and stop key
- Press short: cancel operation or go one step back in
the menu.
- Press long: turn the appliance off or on.
Light key
- To turn the cavity light on or off.
Egg timer
- The egg timer can be used independent of the oven
function.
- The longest possible timer setting is 23:59.
Navigation key left
- To move the active area to the left.
Navigation key right
- To move the active area to the right.
Plus key
- To open or exit the settings menu (in standby-
mode).
- To open or exit the plus menu with the extra options
possible at that moment (in on-mode).
Child lock
- Press and hold the left navigation key and right
navigation key simultaniously to lock the appliance.
Water reservoir key
- To open the water reservoir hatch.
Confirm key
- To confirm all the white settings/elements in the
screen.
EN 11
Navigation
active area
stop key confirm keyfunction knob selection knobnavigation keys
By turning the function knob away from the 0-position, the icon of the
chosen main function is lit. The display will show the icon and name
of the activated function for about 1,5 seconds. Next you will see the
chosen main function and sub-function at the top of the display in the
feedback bar. Also the function settings mode will become active (grey
background). In this activated area you can select your settings using
the selection knob.
180
°C
OVEN l HOT AIR 14:30
Within every menu the navigation is as follows:
Use the navigation keys or press the selection knob to move the
active area (grey background).
The setting in the active area can be changed by turning the
selection knob (left = decrease, right = increase). The setting will be
saved automaticallly.
When all elements in the screen are set, then confirm these settings
by pressing the confirm key (this key will start blinking when it is
possible to start the program).
Press the stop key to go one step back in the menu.
YOUR OVEN
EN 12
At the top of the display is a feedback bar. This bar shows where you
are in the menu and what setting you are changing. Functions / settings
are separated with a vertical line.
SETTINGS l GENERAL l SOUND l KEY SOUND
YOUR OVEN
EN 13
INITIAL USE
What to do first
Clean the oven interior and accessories with hot water and
washing-up liquid. Do not use aggressive cleaning agents, abrasive
sponges and similar.
The oven will emit a particular odor when it is used for the first time;
this is normal. Make sure that there is good ventilation during initial
use.
When the appliance is plugged in for the first time or after the appliance
was disconnected from the mains for a longer period of time, you have
to set ‘Language’, ‘Date’, ‘Time’ and ‘Water hardness’.
Setting the language
English
Deutsch
LANGUAGE
In case you are not comfortable with the language on the display, you
can select another language. The default setting is ‘English’.
1. Turn the selection knob and select your preferred language from the
displayed list.
2. Confirm the setting by pressing the confirm key.
The next screen will be displayed.
Setting the date
01 2015
01
02
DATE l DAY
1. Turn the selection knob and change the first setting (Day).
2. Confirm this setting by pressing the right navigation key or by
pressing the selection knob.
3. Turn the selection knob and change the next setting (Month).
4. Confirm this setting by pressing the right navigation key or by
pressing the selection knob.
5. Turn the selection knob and change the last setting (Year).
6. Confirm this setting by pressing the confirm key.
The next screen will be displayed.
EN 14
Setting the time
: 00
11
12
13
TIME l HOUR
1. Turn the selection knob and change the hours.
2. Confirm this setting by pressing the right navigation key or by
pressing the selection knob.
3. Turn the selection knob and change the minutes.
4. Confirm this setting by pressing the confirm key.
Setting the water hardness
1 red Soft water
WATER HARDNESS
The water hardness must be set prior to initial use.
If the water is softer or harder than the default setting, you can alter the
set hardness level.
Checking the water hardness
You can measure water hardness using the ‘paper test strip’ supplied
with your appliance. For information about water hardness in your
region please contact your local water board.
Using the ‘paper test strip’
Dip the test strip in water for 1 second. Wait 1 minute and read the
number of bars on the paper strip. Check the table for the correct water
hardness setting.
Setting the water hardness
1. Compare the test strip with the image on the display.
2. Turn the selection knob until the bars on the screen correspond
with those on the test strip.
3. Press the confirm button to save the set water hardness.
The equipment has now been programmed so that the descaling
notification will appear in accordance with the actual water hardness.
INITIAL USE
EN 15
Display
Test strip
number/colour
of the bars
Type PPM
French
hardness (°df)
German
hardness (°dH)
1 4 green bars Very soft water 0 - 90 0 - 9 0 - 5
2 1 red bar Soft water 90 -178 9 - 18 5 - 10
3 2 red bars Rather hard water 178 - 267 18 - 26 10 - 15
4 3 red bars Hard water 267 - 356 26 - 35 15 - 20
5 4 red bars Very hard water
> 356 > 35
> 20
All the start-up settings are now set and the display will show the
standby screen. The appliance is now ready for use.
The language, time, date and water hardness can be adjusted in the
settings menu (see ‘Settings menu’ chapter). The settings menu can be
opened from the start display via the ‘Plus’ menu.
Standby display
The standby display will show the time, date, cavity temperature (if
this is higher than 80 °C) and the timer (if set). The appliance goes to
standby mode after:
Turning the function knob to 0 (‘off’ position).
Pressing the stop key multiple times (deeper in the menu).
12 : 00
03 05 2015
Off mode
Default the appliance will shut down after no action for a set time of
30 minutes.
Press and hold the stop key to shut down the appliance manually.
Switching on the appliance
Press and hold the stop key to switch on the appliance.
The appliance can also be switched on by turning the function knob
to a function.
INITIAL USE
EN 16
Selecting your function
Select a function appropriate for the meal you are cooking. Consult the
table in chapter ‘Functions table’ to see which functions are available.
Go directly to the progress mode by pressing the confirm key (this
key is blinking if it is possible to start the program).
After you have chosen a main function, the function settings mode is
active (grey background). In this activated area, it is now possible to
change the settings in this funtion.
Function settings mode
Example (Oven/Hot air + bottom heat/40 minutes)
1. Choose a main function by turning the function knob.
The first sub-function setting becomes active.
180
°C
OVEN l HOT AIR 14:30
Now the settings can be changed as desired. There is the possibility to
set:
The function (consult the table in chapter ‘Functions table’).
The temperature.
The time.
2. Turn the selection knob and change the setting.
200
°C
OVEN l HOT AIR + BOTTOM HEAT 14:30
3. Confirm the setting by pressing the right navigation key or by
pressing the selection knob.
The next sub-function setting becomes active.
200
°C
OVEN l TEMPERATURE 14:30
195
200
°C
205
4. Turn the selection knob and change the setting.
200
°C
OVEN l TEMPERATURE 14:30
205
210
°C
215
OPERATION
EN 17
5. Confirm the setting by pressing the right navigation key or by
pressing the selection knob.
The next sub-function setting becomes active.
210
°C
OVEN l COOKING TIME 14:30
The timer icon shows that there is no timer necessary for this
function. Press the confirm key to start the program directly with
the chosen settings (see step 7).
To set the timer, go to step 6.
If there is a timer necessary for a current function, the default
timer setting is displayed instead of the timer icon.
6. Turn the selection knob and change the setting.
210
°C
OVEN l COOKING TIME 14:30
0:39
0:40
H:M
0:41
H:M notation.
7. If preferred, select any additional setting using the plus menu (for
example fast preheat). See for more information chapter ‘Plus
menu’.
8. If the chosen function involves steam, then the tank must be filled
with clean water before starting the program.
9. Start the program: press the confirm key to go to the progress
mode.
The program will start with the chosen settings; the oven will go to
the progress mode and the progress screen is shown.
210
°C
14:30
0:40
HOT AIR + BOTTOM
15:10
OPERATION
EN 18
Progress mode
Left side on the screen, the temperature is displayed (if the set
temperature is not reached, the temperature will switch between
cavity temp (grey) and set temp (white)). If the set temperature is
reached a pop-up will appear ‘set temperature is reached’.
Right side on the screen, the time (counting down) or the progress
time (counting up if no time was set) is displayed. Next to the
cooking time you can see the finishing time.
210
°C
14:30
0:40
HOT AIR + BOTTOM
15:10
If preheating is chosen, the progress mode will first show the
preheating display (preheating in the feedback bar and the
preheating icon). All settings are displayed only the colours are
switched. The cavity temperature is white and the chosen settings
are grey. If the set temperature is reached, a pop-up will appear:
‘Set temperature is reached. Insert dish’.
210
°C
14:30
0:40
HOT AIR + BOTTOM
15:10
Finish display
When the timer is finished, the ‘finish display’ will appear. Now it is
possible to:
Stop the progress.
Add extra time.
Gratin (if applicable).
Save as favourite.
FINISH l ENJOY 14:30
Stop the progress
1. Press the confirm key.
The finish display will be closed and the standby screen will be
shown.
If there is no action within 10 minutes, the display will switch to
standby mode.
OPERATION
EN 19
OPERATION
Add extra time
1. Press the right navigation key to select ‘Add extra time’.
2. The time setting becomes active and can be changed directly by
rotating the selection knob.
3. Confirm by means of the confirm key.
The previous process is activated again.
Gratin
1. Press the right navigation key to select ‘Gratin’.
Grill settings will be shown.
2. The temperature (default 200 °C) and time can be set or the
program can be started directly by pressing the confirm key (time
will start counting up).
After confirmation with the confirm key the progress screen will be
shown.
Save as favourite
1. Press the right navigation key to select ‘Save as favourite’.
The next screen will show 10 positions where the program can be
positioned.
2. Select a position for your recipe by rotating the selection knob and
press the confirm key to save it.
3. Give the recipe a name. Rotate the selection knob to select the
appropriate letter and press the selection knob to confirm and go to
the next letter.
You can delete a character by means of the backspace function
in the character list (arrow).
4. Press the confirm key to save the recipe.
Changing settings during the progress
During progress, pressing the navigation keys will show the active
area. The selected setting can now be changed, see chapter
‘Function settings mode’.
After confirmation with the confirm key the progress screen will be
shown with the changed settings.
After 5 seconds without actions the progress settings are cancelled
and the display will return to the progress screen.
EN 20
USE
Functions table
Consult the table to choose the desired function. Also consult the
instructions for preparation on the dish packaging.
Function Description
Oven functions
Hot Air
Heating by means of hot air from the back of the
oven.
This mode provides uniform heating and is ideal
for baking.
Place the baking tray or oven rack on level 2.
Suggested temperature: 180 °C
Preheating is recommended.
2
Hot Air + Bottom Heat
Heating by means of hot air from the back of the
oven and the bottom heating element.
This mode can be used to bake pizza, moist
pastry, fruitcakes, leavened dough and short
crust.
Place the baking tray or oven rack on level 2.
Suggested temperature: 200 °C
Preheating is recommended.
2
Top + Bottom Heat
Heating by means of the upper and lower heating
elements.
This mode can be used for traditional baking and
roasting.
Place the baking tray or oven rack on level 2.
Suggested temperature: 200 °C
Preheating is recommended.
2
EN 21
USE
Function Description
Large Grill
Heating by means of the upper element and grill
element.
This mode can be used with dishes and baked
goods that require a distinctive bottom crust or
browning. Use just before the end of the baking or
roasting time.
Place the the oven rack on level 4 and the baking
tray on level 2.
Maximum allowed temperature: 230 °C
Monitor the cooking process at all times. The dish
may burn quickly due to the high temperature.
Preheating is recommended.
2
4
Grill
Heating by means of the grill element.
This mode can be used for grilling a smaller
amount of open sandwiches, beer sausages, and
for toasting bread.
Place the oven rack is on level 4 and the baking
tray on level 2.
Maximum allowed temperature: 230 °C
Monitor the cooking process at all times. The dish
may burn quickly due to the high temperature.
Preheating is recommended.
2
4
Large grill + Fan
Heating by means of the top heating elements.
The heat is distributed by the fan.
This mode can be used for grilling meat, fish and
vegetables.
Place the oven rack on level 4 and the baking tray
on level 2.
Suggested temperature: 170 °C
Monitor the cooking process at all times. The dish
may burn quickly due to the high temperature.
Preheating is recommended.
2
4
EN 22
USE
Function Description
Top Heat
Heating only by means of the upper heating
element.
This mode can be used when you wish to bake/
roast the top part of your dish.
Place the baking tray or oven rack on level 2.
Suggested temperature: 150 °C
2
Bottom Heat
Heating only by means of the lower heating
element.
This mode can be used with dishes and baked
goods that require a distinctive bottom crust or
browning.
Place the baking tray or oven rack on level 2.
Use just before the end of the baking or roasting
time.
Suggested temperature: 160 °C
Bottom Heat + Fan
Heating by means of the lower heating element.
The heat is distributed by the fan.
This mode can be used for baking low leavened
cakes, as well as for preservation of fruit and
vegetables.
Place a not too high baking tray on level 2, so that
hot air can also circulate over the upper surface
of the food.
Suggested temperature: 180 °C
2
Pro Roasting
Heating by means of the upper heating element
in combination with the grill heating element and
hot air.
This mode can be used for roasting all types of
meat.
Suggested temperature: 180 °C
2
3
EN 23
USE
Function Description
ECO Hot air
Heating by means of hot air. ECO hot air uses less
energy but gives the same result as the hot air
setting. Cooking takes a few minutes longer.
This mode can be used for roasting meat and
baking pastry.
Place the tray on level 2.
Suggested temperature: 180 °C
This setting makes use of the residual heat
(heating is not on the whole time) to achieve
low energy consumption (in accordance with
energy class EN 60350-1). In this mode the actual
temperature in the oven is not displayed.
2
Steam functions
Steam
Heating by means of steam.
See chapter ‘Steam function’ for more
information.
Steam of 100 °C is sprayed into the oven cavity at
regular intervals.
This mode can be used to steam vegetables,
eggs, fruit and rice, for example.
Steam - Low temperature
Heating by means of steam.
See chapter ‘Steam function’ for more
information.
Steam is sprayed into the oven cavity at regular
intervals.
This menu can be used to steam vegetables and
fish, to keep food warm and defrost food.
Sous vide
Heating by means of steam.
See chapter ‘Steam function’ for more
information.
The vacuum-sealed food is slow-cooked at a low
temperature.
With this method the food’s flavour, vitamins and
minerals are preserved. Vacuum sealing gives the
dish a longer shelf life.
Use this function to cook vegetables, fruit, meat,
poultry and fish.
EN 24
USE
Function Description
Combi steam functions
High 3
Medium 2
Low 1
Hot air + Steam density 1 / 2 / 3
Heating by means of hot air in combination with
steam.
The steam is sprayed into the oven cavity at regular
intervals.
This mode can be used for baking types of pastry
such as puff pastry, brioche pastry, yeast dough
buns, French bread, gratins and roasting meat.
The hot steam ensures a nice crispy brown top
and an airy texture. Meat and fish remain nice and
juicy inside. For this mode always make sure that
the water reservoir is filled with fresh water.
HIGH: cooking escalopes, steaks and smaller
chuncks of meat
MEDIUM: reheating cool/frozen meals, cooking
fish fillets and vegetables au gratin
LOW: cooking large chuncks of meat (roast, whole
chicken), baking risen dough (bread and rolls),
cooking lasagna etc.
Extra functions
Warming
Plate warming: this function is used for warming
tableware, so that the served food stays hotter for
longer.
Keep warm: this mode is used to keep already
cooked dishes warm.
Regenerate: this mode is used to warm already
cooked dishes. The use of steam means there is
no loss of quality. Taste and texture are preserved
as though the dish is freshly-cooked. Various
dishes can be regenerated simultaneously.
Steam clean
With this function and a damp cloth, you can
easily remove grease and dirt from the oven walls.
Use this function only when the oven has cooled
down fully. Steam is sprayed into the oven cavity
at regular intervals.
After soaking, food residues can be removed
using a damp cloth.
EN 25
USE
Function Description
Defrost
With this function, the air circulates by means of
the fan. The air will be heated to a temperature
of 30 °C.
Use this function to defrost frozen dishes.
Programs and Favourites
Programs: for baking and roasting. Select a dish
from a list of pre-programmed dishes.
Favourites: Select your own stored recipes.
Fast preheat
With this function, the oven cavity is quickly
heated to the desired temperature. Do not use this
setting when you have a dish in the oven.
Steam function
Steam cooking
Healthy and natural, steam cooking retains the colour and taste of the
dish. No odors are released using this cooking method.
Note: The water system empties each time the steam function is
finished. This action is audiable and is part of the steam oven’s normal
operation.
Advantages of steam cooking
Steam cooking (stewing, cooking, roasting) starts before the oven
cavity temperature reaches 100 °C.
Slow cooking (stewing, cooking, roasting) is also possible at lower
temperatures. It is healthy: vitamins and minerals are preserved as only
a small proportion of these dissolve in the hot moisture of the dish.
It is not necessary to add any form of fat or oil during steam cooking.
Steam retains the taste of the dish.
Steam does not distribute smell or taste, enabling meat or fish to
be cooked together with vegetables.
Steam is also suitable for blanching, defrosting and warming or
keeping a dish warm.
EN 26
USE
Sous vide
Using the sous vide steam function:
Vacuuming
First vacuum the food in plastic using a vacuuming machine.
This process removes most of the air from the plastic bag. The
bag preserves nutrients and taste during cooking, resulting in
food that is juicier, softer and tastier.
Vacuum cooking
Cook the dish at the correct temperature and the correct time
using the oven’s Sous Vide steam setting (see ‘Recipes and
cooking times’).
Most dishes can be kept at serving temperature (around 60 °C)
for a few hours, which makes mise en place very easy: you simply
remove the dish from the oven when you need it.
Filling the water reservoir
Always fill the reservoir prior to using a steam function.
Use clean and cold tap water, bottled water without added minerals or
distilled water suitable for consumption.
1. Press the ‘water reservoir’ key to open the water reservoir cover.
2. Use the handle to remove the reservoir from the oven.
3. Remove the water reservoir lid and clean the water reservoir with
clean water.
4. Fill the reservoir with water up to the ‘MAX’ mark on the reservoir
(around 1.2 litres).
5. Push the water reservoir back in the oven until a click is heard
(position switch is activated).
6. Close the water reservoir cover.
EN 27
USE
Any water remaining in the steam system after cooking will be pumped
back into the water reservoir. Empty, clean and dry the water reservoir
after using the steam function. Only fill the reservoir just prior to using it!
EN 28
USE
Steam tables
Steam and Low temperature steam
Use the settings and times in this table as guide lines for steaming.
Always fill the water tank with fresh water to the maximum level.
Dish
Temperature
Time
(min.)
Accessory (shelf level)
Broccoli Florets 100 °C 15 - 25 Perforated steam dish (2)
Whole Carrots 100 °C 25 - 35 Perforated steam dish (2)
Sliced Vegetables (pepper,
courgettes, carrots, onions)
100 °C 15 - 25 Perforated steam dish (2)
Green Beans 100 °C 20 - 25 Perforated steam dish (2)
Asparagus 100 °C 15 - 25 Perforated steam dish (2)
Whole Vegetables
(artichokes, whole cauliflower, corn
on the cob)
100 °C 25 - 35 Perforated steam dish (2)
Peeled Potatoes (cut into quarters) 100 °C 25 - 35 Perforated steam dish (2)
Fish Fillet (2 cm thickness) 80 °C 15 - 20
Perforated steam dish in a
non-perforated steam dish (2)
Prawns (raw/uncooked) 100 °C 10 - 14
Perforated steam dish in a
non-perforated steam dish (2)
Chicken Breast 100 °C 20 - 30
Perforated steam dish in a
non-perforated steam dish (2)
Boiled Eggs (hardboiled) 100 °C 15 - 20 Non-perforated steam dish (2)
Frozen Yeast Dumplings 100 °C 15 - 25 Perforated steam dish (2)
White Rice (basmati or pandan)
(add double quantity of water)
100 °C 25 - 35 Non-perforated steam dish (2)
Fruit Compote
(use a flat round glass pyrex, add 1
teaspoon sugar and 2 tbsp. water)
100 °C 25 - 35 Baking tray or oven rack (2)
Flan/Crème (6 dessert dishes,
each 100 ml, cover dishes with foil)
90 °C 20 - 30 Baking tray or oven rack (2)
Egg Custard (use a large flat glass
pyrex dish, cover dish with foil)
90 °C 40 - 50 Baking tray or oven rack (2)
EN 30
USE
Sous Vide table
Sous Vide cooking is cooking vacuum-packed food at low constant
temperature over a long period of time.
Dish
Temperature
Time (min.) Accessory (shelf level)
Beef llet medium (4 cm thickness) 60 °C 150 - 160
Oven rack (2)
Beef llet well done (4 cm thickness) 70 °C 120 - 140
Oven rack (2)
Lamb rare (3 cm thickness) 60 °C 180 - 190
Oven rack (2)
Lamb medium (3 cm thickness) 70 °C 90 - 100
Oven rack (2)
Chicken breast boneless (3 cm thickness) 70 °C 70 - 80
Oven rack (2)
Duck boneless (2 cm thickness) 65 °C 90 - 100
Oven rack (2)
Turkey boneless (2 cm thickness) 75 °C 75 - 85
Oven rack (2)
Sea bass (4 llets/1 cm thickness) 60 °C 25 - 35
Oven rack (2)
Cod sh (2 llets/2 cm thickness) 60 °C 30 - 40
Oven rack (2)
Scallops (big size) 60 °C 40 - 50
Oven rack (2)
Mussels with shell 60 °C 50 - 60
Oven rack (2)
Prawns without shell (big size) 60 °C 30 - 40
Oven rack (2)
Octopus 85 °C 220 - 240
Oven rack (2)
Trout llet (2 llets/1,5 cm thickness) 60 °C 60 - 70
Oven rack (2)
Salmon llet (3 cm thickness) 60 °C 50 - 60
Oven rack (2)
Asparagus green (whole) 85 °C 60 - 70
Oven rack (2)
Asparagus white (whole) 85 °C 70 - 80
Oven rack (2)
Courgette (slices of 1 cm) 85 °C 30 - 40
Oven rack (2)
Egg plant (slices of 1 cm) 85 °C 60 - 70
Oven rack (2)
Carrots (slices of 0,5 cm) 85 °C 80 - 90
Oven rack (2)
EN 31
USE
Culisensor
If the culisensor is plugged in, the culisensor screen will be shown and
a small culisensor icon will appear next to the time. The oven operates
until the food core reaches the set temperature. The core temperature
is measured by means of the temperature probe.
1. Remove the rubber cap from the socket (right upper corner of the
oven cavity).
2. Insert the culisensor plug into the socket and insert the culisensor
completely into the dish.
The display will show the culisensor screen and icon.
3. Set the function and temperature. Instead of the time, you need to
set the core temperature (between 30-100 °C).
4. Start the progress by pressing the confirm key.
During cooking, the rising temperature of the core will be displayed
(the desired core temperature may be adjusted during the cooking
process).
When the set core temperature is reached, the cooking process
will stop. An acoustic signal will sound, which you may turn off
by pressing any key. After one minute, the acoustic signal will be
switched off automatically. The current time appears on the display.
Always place the culisensor’s entire metal probe in the dish.
Caution! After cooking, place the rubber cap back on the
culisensor socket.
Only use the probe intended for use with your oven. Make sure the
probe does not touch the heating element during cooking. After
cooking, the probe will be very hot. Take care to prevent injury
(burns).
EN 32
Recommended core temperature values
Beef
Fillet/sirloin medium 55 - 58 ºC
Roast beef medium 55 - 60 ºC
Round steak well-done 85 - 90 ºC
Roast beef well-done 80 - 85 ºC
Stewed beef well-done 90 ºC
Pork
Hoof/leg well-done 75 ºC
Hoof/leg slightly pink 65 - 68 ºC
Pork loin slightly pink 65 - 70 ºC
Pork shoulder well-done 75 ºC
Pork belly/stuffed well-done 75 - 80 ºC
Pork belly well-done 80 - 85 ºC
Roast pork hoof well-done 80 - 85 ºC
Pork hoof well-done 80 - 85 ºC
Cooked ham very tender 64 - 68 ºC
Kassel ribs well-done 65 ºC
Breaded ham 65 - 68 ºC
Veal
Veal loin slightly pink 58 - 65 ºC
Veal hoof/leg of veal well-done 78 ºC
Fried kidneys well-done 75 - 80 ºC
Roast veal/shoulder well-done 75 - 80 ºC
Leg of veal well-done 75 - 78 ºC
Mutton
Mutton loin pink 65 - 70 ºC
Mutton loin well-done 80 ºC
Mutton hoof pink 70 - 75 ºC
Leg of mutton 82 - 85 ºC
Lamb
Leg of lamb pink 60 - 62 ºC
Leg of lamb well-done 68 - 75 ºC
Lamb loin pink 54 - 58 ºC
Lamb loin well-done 68 - 75 ºC
Lamb shoulder well-done 78 - 85 ºC
Poultry
Chicken well-done 85 ºC
Goose/Duck well-done 90 - 92 ºC
Turkey well-done 80 - 85 ºC
Pastries etc
Pastries 72 - 85 ºC
Terrines 60 - 70 ºC
USE
EN 33
Fish
Salmon soft 60 ºC
Fish fillet 62 - 65 ºC
Entire fish 65 ºC
Terrine 62 - 65 ºC
Settings menu
The settings menu is only available by pressing the ‘plus key’ when the
appliance is in standby mode.
Setting Description
General
Language
Time
Date
Sound
Display
Brightness
Clock size
Night mode
Appliance to stand-by mode
Cooking
Default program intensity
Steam
Preheat settings
System
Appliance information
Factory settings
Oven light
General
You can set the following from this menu:
Language (language of the display)
Time (always in 24H format)
Time display (24H or 12H format)
Date (always day-month-year format)
Date display (ddmmyyyy or mmddyyyy)
Sounds (volume of the general sounds and alarms)
Key sounds (on/off)
Welcome sound (startup/shutdown sound on/off)
USE
EN 34
Display
You can set the following from this menu:
Brightness (low, mid, high)
Night mode (start and end time for lower display brightness: first
display set start timer, second display set end time)
Clock size (small / large)
Stand-by (auto switch off / manually switch off)
Changing to manually switch off will increase energy consumption.
If the oven is switched off manually (or when an interruption of the
power supply occurs) this function will be reset (the display will
automatically switch off).
Cooking settings
You can set the following from this menu:
Default program intensity (low / medium / high)
Steam settings (Water hardness / Descaling)
Preheat settings (set preheat default on or off)
System
You can set the following from this menu:
Appliance information (request appliance information)
Factory settings (back to factory settings)
Oven light (auto switch off after 1 min. / manual)
Plus menu
Depending on the function, there is a possibility to choose extra
functionality (after you have chosen a main function and settings in the
‘Function settings mode’) by pressing the ‘plus key’.
A small icon next to the curent time will give an indication about the
activated plus menu functions. The colour of the icon will indicate if
it is active (white) or inactive (grey).
To exit the plus menu, press the ‘stop key’ or ‘plus key’; the display
will show the previous screen again.
To cancel an extra functionality, select ‘cancel’ (icon with a red
stripe).
USE
EN 47
General
If you have problems with your oven, then consult the error overview
below. Should the problems persist, then please contact the Customer
Services Department.
The food stays raw
Check whether the timer has been set and you have pressed the
‘confirm key’.
Is the door closed properly?
Check whether a fuse has blown or a circuit breaker has been
activated.
The food is overcooked or undercooked
Check whether the correct cooking time has been set.
The keys do not respond; the display does not respond to the
keys.
Disconnect the appliance from the power supply for a few minutes
(remove the mains plug from the socket or switch the circuit
breaker to off); then reconnect the appliance and switch it on.
Power failure can cause the display to reset.
Disconnect the appliance from the power supply for a few minutes
(remove the mains plug from the socket or switch the circuit
breaker to off); then reconnect the appliance and switch it on.
Set the time again.
There is condensation in the oven.
This is normal. Wipe the oven clean after use.
The fan keeps working after the oven is switched off.
This is normal. The fan will keep working for a while after the oven
is switched off.
Air flow can be felt at the door and the exterior of the appliance.
This is normal.
Steam escapes via the door or the vents.
This is normal.
SOLVING PROBLEMS
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG CS6692D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG CS6692D in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG CS6692D

ATAG CS6692D User Manual - German - 52 pages

ATAG CS6692D User Manual - Dutch - 56 pages

ATAG CS6692D User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info