556918
53
Zoom out
Zoom in
Previous page
1/62
Next page
EN 53
DESCALE MODE (CONTINUED)
5
When it has progressed for about
40minutes, the machine displays
“10:00” and stops operating with a
beep.
Remove the tank and empty any
remaining mixed water.
Wash the tank with water and fi ll up to
the maximum line with clean water.
Put it back into the main unit.
Ź When ‘10:00’ is displayed, you have
to operate the rinse mode within
25minutes. If you do not, the set
will be reset after 25 minutes and
then you will perform the descale
mode again.
6
Automatically start after 5 seconds.
A rinse mode takes place with clean
water. After 10 minutes later, the
descale mode will be completed.
7
When done, the machine will make a
beep. Empty both the tank and the drip
tray and clean the tank with water.
8
Open the door and wipe inside the
cooking cavity with a dry cloth.
Note
We advise to use NOKALK/DLS when you descale the machine. NOKALK/DLS is a highly
e ective descaler made exclusively from natural, totally biodegradable substances. It is non-
corrosive, non-aggressive and has no environmental impact.
As well as being an e ective descaler, it also has an antimicrobial sanitising action, thus helping
to ensure the hygiene of the machine’s internal components, preserve the taste of the food
over time and extend the working life of the machine.
For subsequent descaling operations with NOKALK/DLS, descaling solvent can be purchased
from www.atag.nl
Water which is used for steam cooking, contains calcium and magnesium. Through heating,
water evaporates and only the fl oating materials (minerals) remain (not harmful to humans).
If the descaling cycle is interrupted before completion, the programme must be started again
from the beginning.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG CS4492B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG CS4492B in the language / languages: English as an attachment in your email.

The manual is 5,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATAG CS4492B

ATAG CS4492B Quick start guide - Dutch - 2 pages

ATAG CS4492B User Manual - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info