111712

ATAG CM 4192 AC Manual

64
Zoom out
Zoom in
Previous page
1/93
Next page
YOUR COFFEE MACHINE
5 Use
GB 17
Make sure that the suction pipe is correctly inserted (fi g. 16); next 3.
place the lid back on the milk container and fasten it with a slight
anti-clockwise turn.
Pull the hot water nozzle off (fi g. 17).4.
Bring the milk container up to the nozzle (fi g. 18).5.
You can set the amount of froth on the milk to any level using the 6.
slider on the lid (fi g. 19): ‘CAPPUCCINO’ or ‘CAFFELATTE’
- CAPPUCCINO: very frothy milk.
- CAFFELATTE: not so frothy milk.
Once the milk container is put in place, the appliance suggests the 7.
next step on the display: PRESS KEY X1 FOR CAPPUCCINO,
X2 FOR MILK ONLY.
CLEAN
16
17
18
19
YOUR COFFEE MACHINE
5 Use
GB 16
If the fi lling chute is blocked (due to damp in the appliance or •
because more than 2 measuring spoons have been inserted), use a
knife or spoon handle to push the ground coff ee down (fi g. 14).
Next remove the brewing unit and clean it together with the
coff ee machine as described in 6.1.1 and 6.1.2 on page 21, 22
and 23.
To return to the mode for coff ee beans after making the coff ee, •
turn the “coff ee strength/preground coff ee” knob to any coff ee
strength setting (the coff ee grinding mill is re-enabled).
5.2.7 Preparing hot water
Hot water can be used to warm up cups and to make hot drinks, such
as tea or packet soups.
Warning! Risk of scalding when the hot water nozzle is activated!
Escaping hot water can lead to scalds. Only activate the hot water
nozzle when there is a receptacle under the hot water nozzle.
Put the hot water nozzle in place (fi g. 15).1.
Place a container underneath the hot water nozzle (fi g. 15).2.
Press the “hot water” button 3.
. Hot water is dispensed; the
display shows HOT WATER. Once the programmed amount of
hot water has been dispensed, dispensing stops automatically.
For a few seconds the display shows PLEASE WAIT.... After that
the appliance is ready to make coff ee again and the last selected
coff ee setting appears on the display.
5.2.8 Making cappuccino or hot milk (coff ee and milk froth)
You can use this function to either make hot, frothy milk or
cappucino. To do this, use the special milk container. Rinse the
container under the tap when you are about to use it for the fi rst time.
Unfasten the lid of the milk container with a slight clockwise turn 1.
and remove it.
Fill the container with suffi cient milk (preferably skimmed or 2.
semi-skimmed milk at fridge temperature (about 5 °C) should be
used). Do not go over the MAX line engraved on the container
handle (comes to about 1000 ml).
14
15
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG CM 4192 AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG CM 4192 AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info