111331
134
Zoom out
Zoom in
Previous page
1/180
Next page
YOUR COFFEE MACHINE
6 Maintenance
GB 28
6.2.6 Rinsing
If 2/3 minutes have passed, since you last made co ee, you should
rst rinse the system to preheat the brewing unit. Select the rinsing
function from the appropriate menu. Let the water run into the drip
tray underneath. You can also use this water to warm up the cup that
you are using for the co ee. In this case simply let the hot water run
into the cup (and then empty it).
1. Press the MENU button
and press the scrolling buttons < or >
until the menu option RINSING appears. Con rm the menu
option with the OK button.
2. e appliance performs an automatic rinse cycle (a little hot water
runs out of the spouts and is collected in the drip tray beneath).
6.2.7 Statistics
e appliance allows the following values to be looked up:
the total number of co ees made with the appliance up to that
point;
the number of descaling procedures carried out;
the number of cappuccinos made.
If 2 cups of co ee are dispensed at the same time then these are
counted as 2 cups.
Proceed as follows to look up the values:
1. Press the MENU button
and press the scrolling buttons < or >
until the menu option STATISTICS appears. Con rm the menu
option with the OK button.
2. en number of cups dispensed until that time appears on the
display, e.g. TOT. COFFEES 135 for 135 co ees dispensed.
3. Repeatedly press the scrolling button > to show the number of
descaling procedures carried out, e.g. TOT. DESCALES 5 and the
number of cappuccinos, e.g. TOT. CAPPUCCINO 135.
6.2.8 Resetting the appliance to factory settings
is function resets previously changed values to the factory settings.
e following settings or saved data are a ected:
water hardness;
cup  lling quantities;
co ee temperature;
switch-o time.
134


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG CM 4111 AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG CM 4111 AC in the language / languages: Dutch as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info