Introduction
The ATAG Brain timer thermostat is an advanced digital timer thermostat, in which the most recent computer technology has been
incorporated. The ATAG Brain has been specially developed for use with the ATAG S-HR heating appliance. The heating appliance passes
on a number of unique features to the ATAG Brain timer thermostat.
The ATAG Brain is unique in that in contrast to a standard timer thermostat it has fewer switch-on moments. The boiler continues to burn
on low power when the set temperature has been reached. As a result the supply of heat to the installation is constant. This means
that the set temperature continues to be maintained with a low number of switch-on moments.
All information which is displayed on the read-out window is in English. If you wish, you can also have it displayed in German (see page
22). The ATAG Brain is fitted with a back-up battery*. In the event of an eventual power failure, the settings of the Brain are retained. The
battery does not have to be replaced.
By connecting the ATAG outside temperature sensor the installation benefits from weather-dependent
1)
control.
The weather-dependent control can bet set by your installer in two ways:
- weather-dependent control with the Brain as room compensation
2)
, or
- full weather-dependent control with the Brain as remote control (for installations with thermostatic radiator valves).
1)
Weather-dependent means that the heating appliance itself calculates the temperature of the CH water based upon the outside
temperature and the heating line.
2)
Room compensation means that the Brain measures and regulates the temperature in the room. Without room compensation (fully
weather-dependent) a simulation temperature is displayed on the Brain. You then regulate the desired temperature using the
thermostatic radiator valves on the radiators. The Brain then acts as a remote control for your heating appliance.
