608135
24
Zoom out
Zoom in
Previous page
1/40
Next page
ATAG A-Serie
24
The pump is preset in the factory to automatic. This
means that the pump is switched on when there is
a request for heating or hot water. If necessary, the
pump can also operate continuously. This requires
the following actions:
Press the OK key for 3 seconds.
The display is showing ‘P6 (alternated with) 81’;
Press the Scroll key 1x;
The display is showing ‘P6 (alternated with) 84’;
Press the OK key;
The display is showing ‘b0’;
Press the OK key;
The display is showing ‘off (= automatic);
Adjust the value by means of the + or - key to
‘on’ (= continuously);
Brie y press the OK key to con rm the new
setting.
The display is showing the chosen parameter
again
Press the ESC key until the default display is
shown again.
An arrow appears on the display in the bottom
left-hand corner, indicating that the pump is now
continuously switched on.
If during 8 minutes no key has been pressed,
the default display is displayed on the screen
automatically.
ba
r
In case of frost you are
advised to have the
circulation pump run
continuously to reduce the
chance of frozen pipes.
8 Pump continuous
OK
ESC
scroll
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG A243C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG A243C in the language / languages: English, Dutch, Polish as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info