532068
73
Zoom out
Zoom in
Previous page
1/110
Next page
67
Answering system
About the answering system
Message capacity
The answering system can record and store up to 99 messages. Each
message can be up to four minutes in length. The total storage capacity
for the announcement, messages and memos is approximately 14 minutes.
The actual recording time depends on individual message characteristics.
Messages remain available for replay until you delete them.
If the answering system has less than three minutes, it announces, “Less than
three minutes to record. The handset screen displays Less than 3 min to
record before message playback.
If the memory is full, the answering system announces, “Memory is full. The
handset screen displays Memory full and the number of messages and F are
flashing alternately in the message counter. You cannot record new messages
until old ones have been deleted.
Voice prompts
The system provides voice prompts to guide you through remote access and
recording outgoing announcements.
Call screening at the telephone base
If the answering system and call screening are on, the announcement and
the incoming message broadcast at the telephone base when a call arrives.
During message recording, press /PLAY/STOP repeatedly to turn call
screening on and off for this call. Press VOLUME on the telephone base
to adjust the message volume. To change the call screening setting for all
calls see page 37.
During call screening, press /PLAY/STOP on the telephone base to turn
off the call screening. If the call screening is off and the answering system
has answered a call, press /PLAY/STOP or VOLUME to turn on the call
screening.
Call intercept
When a caller is leaving a message on your answering system, you can
stop recording and talk to the caller by pressing HOME/FLASH or
/SPEAKER on the handset.
Telephone base ringer volume
Press VOLUME on the telephone base to adjust the ringer volume when
the telephone is not in use. When you set the ringer volume to zero, the base
ringer is off and the system announces, “Base ringer is off.
Temporarily turning off the message alert tone
Pressing any telephone base key (except /HANDSET LOCATOR) temporarily
silences the message alert tone.
The message alert tone plays with the next incoming message.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AT-T TL92220 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AT-T TL92220 in the language / languages: English as an attachment in your email.

The manual is 12,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info